PC Compound Factory

• 

PC has good heat resistance. Generally, when processing ordinary PC materials, its melting temperature can be set between 240 and 300. Even if it stays for a long time, it generally does not decompose. But why do we often see discoloration in the production of some electrical products? This is because the market is now highly competitive. In order to reduce production costs, most manufacturers use PC modified materials or recycled materials to produce low- and medium-grade electrical products. Someuse compound materials such as flame retardants and fillers. Because these materials are mixed, and the plasticization requirements are high, it is difficult to control the process, which causes problems. But these problems can be solved. Our company is very experienced in this area and provides the following solutions to solve these problems:

(1) In terms of process conditions, the melting temperature is mainly considered. Generally, the barrel temperature should be lowered step by step, especially the temperature of the first two sections, and different temperatures are used for different materials. The temperature of the barrel is generally when using PC modified matetiald to produce lighting products. It should be controlled at around 280. Of course, the final selection of the molding temperature must also consider the product shape, size, mold structure, product performance requirements, and other aspects. The second is to fully dry the raw materials to reduce the possibility of trace moisture to the hot melt catalytic cracking. In addition, if the screw speed is too fast, the backpressure is too high, the injection rate is too fast, and the nozzle hole size, runner, and gate size are too small, etc., the melt will generate high shear heat, resulting in melt fracture of the PC. Moreover, it is easy for the gas in the mold cavity to be exhausted in time, resulting in partial burns and darkening of the product.

(2) In terms of equipment, due to the high melt viscosity of PC, the poor fluidity, the high injection pressure required, the strong bonding force with the metallurgy, and the decomposition products have strong corrosiveness to metals, so when selecting processing equipment, small or special Designed, chrome-plated screw, and the plasticizing system does not allow blind spots, dull materials, notches, cracks and so on. Generally speaking, if the process conditions are correct, and the melt is discolored during air injection, this indicates that there is a problem with the plasticizing system, and the plasticizing system needs to be checked one by one.

(3) If there are black spots found in the materials and operation methods as soon as the machine is turned on, this is mostly related to the barrel storage. Therefore, it is necessary to pay attention to the operation method. When the barrel is stocked with PC before starting, the barrel should be cleaned with new materials at the molding temperature 3 to 4 times. If the stored materials are other materials, especially those with poor thermal stability This requires that the temperature can not be increased when the machine is turned on, and the barrel can not be cleaned with PC materials. Only low-temperature materials with good thermal stability such as PS and PE can be used to clean the materials. The temperature of the cylinder is raised to the normal processing temperature of the PC and then washed with the PC material before processing. During the process, if the product needs to be temporarily suspended, the temperature of the barrel must be lowered below 160 to prevent the material from disintegrating and discoloring for too long.

Our company also hason sale, welcome to consult.

Other supplier products

	PA6 Compound Manufacturer	As a, share with you the factors that affect the toughening effect of modified plastics. The three major factors that affect the toughening effect ...
	Environmental Friendly Bromine-based Flame Retardant Nylon PA66 Granules	Environmental Friendly Bromine-based Flame Retardant Nylon PA66 Granules Environmental friendly, flame retardant, customized and factory direct. Ma...
	High Gloss PP Granules	High Gloss PP Granules Injection grade, high glossy, easy molding process, customized Main Applications: Rice cooker shell and other home applica...
	GF Reinforced PA6	Injection grade, , high impact resistant, high strength resistant, customized and factory direct. Main Applications: Automotive parts, Electronic ...
	Anti-cold Nylon PA6 Granules	Anti-cold Nylon PA6 Granules Injection Molding Grade, Anti-cold -40°C, Toughening. Main Applications: Automotive parts, Electronic Appliances...

Same products

	Ongoing For Sale LDPE Plastic Scrap, LDPE roll, Bale, Lumps	Seller: I Global Scrap Trading Co.	Welcome to IvoryPharInc.com, the foremost source for high-quality LDPE scrap. Since our establish...
	Acrylic Scrap For Sale, PMMA Sheet, Offcuts, Trim, Prime Supplier	Seller: I Global Scrap Trading Co.	IvoryPharInc.com, situated in the United States, is your devoted source for exporting and supplyi...
	TPEs from ATPolymer	Seller: GuangDong Advanced Thermoplastic Polymer Technology Co.,Ltd	Improve flame-retardant performance: It has obtained UL 94V0 grade yellow card certification (1.5...
	TPEE from ATPolymer	Seller: GuangDong Advanced Thermoplastic Polymer Technology Co.,Ltd	TPEE Polymer (TPE Elastomero Termoplastico) is a block copolymer containing polybutylene terephth...
	Super Soft TPEs	Seller: GuangDong Advanced Thermoplastic Polymer Technology Co.,Ltd	The rubber-like functional group is introduced into the material, and when applied to the cable s...