RTV-2 Silicone Rubber for Candle Mold Making
Description of RTV-2 Silicone Rubber for Candle Mold Making
RTV-2 silicone rubber is a two-component material, which consists of Part A base silicone and Part B CA30 curing agent; then the silicone base and curing agent can cure at room temperature by a condensation reaction. These silicone rubber materials can be cast into the cured silicone mold: plaster, polyurethane, PU, GRC, cement, resin, polyester, wax etc.
Applications of RTV-2 Silicone Rubber for Candle Mold Making
MCSIL-215/218 silicone rubber is suited for middle size reproduction of candle mold, soap mold, small size concrete stones, artificial stones, plaster molding, figures, art objects, decoration molding, and the products with thin flower patterns.
How to make the silicone mold?
The surface of the original objects should be clean and free of loose material. If your products have thin flower patterns, and especially have porous substrates, please use a suitable mold release agent such as soap water, detergent, Vaseline or petroleum jelly.
Mixing
Please weigh Part A silicone base and part B CA30 Curing Agent with ratio of 100:2 into a clean container. Stir Part A base silicone thoroughly before use, then Mix Part A and Part B evenly until the curing agent completely dispersed in the silicone base. Manual or mechanical mixture can be used, but do not last much time or allow the temperature to exceed 35℃ (95℉).it’s suitable to mix small quantities to ensure thorough mixture of silicone base and curing agent.
Note: It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mixture to completely expand and then collapse. After a further 1 to 2 minutes under vacuum, the mixture should be inspected and can be used if free of air bubbles. A volume increase of 3 to 5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.
Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original object, avoiding air entrapment. The catalyzed material will cure to a flexible rubber within 6 hours (or faster by different mixing ratio or room temperature), we advice you de-mold after 24 hours, it is will improve the replicate times of silicone mold.
Storage of RTV-2 Silicone Rubber for Candle Mold Making
When the silicone rubber is stored at or below 30 ℃ (85 ℉) in the original unopened containers, RTV2 silicone base and curing agent have a usable life of 12 months from the date of production.
Note of RTV-2 Silicone Rubber for Candle Mold Making
RTV2 silicone rubber is an industrial product and must not be used in food molding, dental human skin molding applications.
Packing of RTV-2 Silicone Rubber for Candle Mold Making
Part A base silicone: 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 0.25kg/bottle,1kg/bottle and 10kg/bottle
Other supplier products
|
|
Tin Base Mold Making Silicone |
Description of Tin Base Mold Making Silicone
RTV2 Tin-based silicones, also called condensation cure silicone, are two- component materials which ... |
|
|
Tin Base Mold Making Silicone |
Description of Tin Base Mold Making Silicone
RTV2 Tin-based silicones, also called condensation cure silicone, are two- component materials which ... |
|
|
RTV-2 Silicone Rubber for Stone Mold Making |
Description of RTV-2 Silicone Rubber for Stone Mold Making RTV-2 silicone rubber is a two-component material, this kind of silicone rubber consist... |
|
|
RTV-2 Silicone Rubber for Soap Mold Making |
Description of RTV-2 Silicone Rubber for Soap Mold Making
RTV-2 silicone rubber is a two-component material, which consists of Part A base silic... |
|
|
Skin Casting Silicone Rubber |
RTV Life casting liquid silicone rubber
Applications of Skin Casting Silicone Rubber
Life casting silicone suitable for human skin model made, ... |
All supplier products
Same products
