Skin Casting Silicone Rubber
RTV Life casting liquid silicone rubber
Applications of Skin Casting Silicone Rubber
Life casting silicone suitable for human skin model made, Life casting, Masters, Prototypes, Decorative Component, Architectural Models, etc.
Data of Skin Casting Silicone Rubber
|
P Item NO. |
Characteristics before curing |
Curing |
||||||||
|
Part A |
Part B |
Part A+ Part B |
Pot life at 250C mins |
De-molding Time at 250C |
||||||
|
Appearance |
Ratio |
Viscosity cps |
||||||||
|
RTV SK5 |
Liquid white |
Liquid clear |
100:2 |
9000 -25000 |
8-10 |
4-6 H |
||||
|
RTV SK0 |
Liquid white |
Liquid clear |
100:2 |
4500-6000 |
0-1 |
4-6 H |
||||
|
Characteristics after curing 24 hours |
||||||||||
|
Hardness Shore A |
Tear strength (N/mm) |
Tensile Strength (Mpa) |
Elongation break (%) |
Linear Shrinkage |
||||||
|
RTV SK5 |
5-10 |
20 |
≥2.5 |
650 |
≤0.3% |
|||||
|
RTV SK0 |
0-1 |
20 |
≥2.5 |
750 |
≤0.3% |
|||||
Note: You can add the pigment to adjust the color of the silicone appearance.
Procedures of Skin Casting Silicone Rubber
Note: It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 mins under vacuum, the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.
Packing of Skin Casting Silicone Rubber
5kg/drum or 20kg/drum
Send product request
Other supplier products
 |
RTV-2 Silicone Rubber for Stone Mold Making | Description of RTV-2 Silicone Rubber for Stone Mold Making RTV-2 silicone rubber is a two-component material, this kind of silicone rubber consist... |
 |
RTV-2 Silicone Rubber for Shoe Mold Making | Description of RTV-2 Silicone Rubber for Shoe Mold Making RTV-2 silicone rubber is a two-component material, the silicone consists of Part A silic... |
 |
RTV-2 Silicone Rubber for Mold Making | Introduction RTV-2 is a two-component Room-Temperature-Vulcanizing (RTV-2) silicone rubber. Depending on its curing mechanism, two types of RTV-... |
 |
RTV-2 Silicone Rubber for Candle Mold Making | Description of RTV-2 Silicone Rubber for Candle Mold Making RTV-2 silicone rubber is a two-component material, which consists of Part A base silic... |
 |
Liquid Silicone Rubber for Molding | Description RTV-2 is a two-component Room-Temperature-Vulcanizing (RTV-2) silicone rubber. Depending on its curing mechanism, two types of RTV-2... |
Same products
 |
Embossed Silicone Rubber Wristbands/Bracelets Bulk | Seller: Yppromotion | In addition to those ordinary wristband types, YP Promotion also has a novel technology that can ... |
 |
SILICONE BRACELET | Seller: Yppromotion | The silicone bracelet is made of solid silicone rubber pressed by an oil press. Wholesale persona... |
 |
Silicone Square ICE Cube Tray | Seller: Shenzhen YF Technology Co.,Ltd | The square ice cube mold is square in shape, square in shape and rectangular in shape. It is main... |
 |
Silicone Sports Bottle | Seller: Shenzhen YF Technology Co.,Ltd | Silicone Water Bottle Review Silicone sports bottle is resistant to high and low temperatures. I... |
 |
Silicone Sphere Tray | Seller: Shenzhen YF Technology Co.,Ltd | Environmental friendly material, food grade silicone, used for making various ice cubes, which ca... |
