Silicone encapsulant for LEDs,Silicone Rubber for Electronic Products,Liquid Silicone Rubber
DESCRIPTION:
Silicone encapsulant for leds is a type of two-component encapsulation silicone cured at room temperature.This silicone works on the surface of material as PC(Poly-carbonate), ABS,PP, PVC as to its superior bonding feature. It is also applicable for insulation, waterproof and bonding of electronics parts. It has many merits, such as chemical resistance, good thermal transfering ability, and it meets the requirements of European ROHs, UL94-V1.
USAGE:
Encapsulation Silicone is widly used in filling for leds, electronic display, circuit board, solar panels, PV cells,machinery,electrical connections.
TECHNICAL GUIDELINE:
1.Please put part A and B in separate container and stir evenly before mixing the two parts together.
2. Mixing Ratio: part A: part B = 10:1
3.Bubble release if necessary , deaeration the mixture under 0.08 MPa for 3 minutes.
4. This silicone is cured at room temperature, so please put it under room temperature after pouring. It comes to next process when basically cured, and it takes about 24 hours for completely cured.
Kindly note: Temperature and Humidity with tremendous influences for curing.
WARM TIPS:
1.Sealing package for storage. The mixture should be used up at once to avoid wasting.
2. The thermal transfer silicone belongs to non-dangerous goods, but keeps away form mouth and eyes.
3. When it gets stratified after a period of storage, Please mix the silicone evenly before using, it does not affect the performance.
PACKAGE:
22kg/set (Part A 20kg + Part B 2kg)
USAGESHELF LIFE AND TRANSPORTATION:
1.Twelve(12) months when stored at 24℃ in original unopened packages.
2. This kind of product is non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.
ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.
What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
For more information, welcome to contact Lilian:
Phone:
E-mail: lilian(at)
/>Company: XINRUN GROUP LIMITED
Factory address:No.2,Zhouliao Road, Langzhou Industrial Zone,Changping, Dongguan, Guangdong, China
Other supplier products
|
Silicone Rubber Material For Toys,Manual mold making silicone rubber,High Safety Silicone Rubber |
DESCRIPTION OF MANUAL MOLD DESIGN MAKING LIQUID SILICONE RUBBER RAW MATERIALS:This is a kind of room temperature vulcanized silicone rubber ... |
|
Pad printing silicone rubber,Silicone Rubber Stampers,Colorful Silicone Rubber,Silicone Rubber With High Quality |
INTRODUCTION OF THE SILICONE RUBBER FOR MAKING PRINTING PAD:Pad printing silicone rubber is kinds of RTV-2 liquid silicone rubber with excel... |
|
Silicon Rubber for Shoe mold making,SGS,FDA,High Safety Silicone Rubber |
LIQUID RTV-2 SHOE MOLD SILICONE RUBBER APPLICAITONS:Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, pla... |
|
Silicone Rubber for Cement Casting,Silicone Rubber For Statues Molds,High Tear Strength Silicone Rubber |
DESCRIPTION OF SILICONE RUBBER FOR CEMENT CASTING:It is a kinds of Two-parts silicone, part A is flowable liquid silicon, part B is curing a... |
|
Silicone rubber for computer keyboard,Colorful Silicone Rubber,Fast Curing Liquid Silicone Rubber |
PRODUCT DESCRIPTION:This series are 2-part liquid silicone rubber suitable for injection molding processes, catalyzed by platinum.KEY FEATUR... |
All supplier products
Same products