Cheap price two component silicone rubber liquid for model making
Cheap price two component silicone rubber liquid for model making
Model Making Silicone
1 Description
GC silicone mold rubbers are widely used to reproduce high-quality miniature and large-scale models at a relatively fast pace. Tin-cured (C-8 series) silicone mold rubbers offer great flexibility, chemical resistance and release properties. Popular product options is C-820/C-825/C-830.
|
Typical general characteristics |
Inspection Method |
Value |
||
|
Product data (Catalyzed A+B) |
C-820 |
C-825 |
C-830 |
|
|
Hardness |
Shore A |
20±2 |
25±2 |
30±2 |
|
Mix Ratio |
A:B |
100:3 |
100:3 |
100:3 |
|
Color |
/ |
White |
White |
White |
|
Pot life |
25 °C (77F) |
30-40mins |
30-40mins |
30-40mins |
|
Curing time |
25 °C (77F) |
3-4 hours |
3-4 hours |
3-4 hours |
|
Mixed viscosity |
16000±1000 |
20000±1000 |
23000±1000 |
|
|
Tear-strength |
kg/cm |
20±2 |
22±2 |
23±2 |
|
Tensile-strength |
||||
|
Elongation |
% |
400±50 |
450±50 |
460±50 |
|
Shrinkage |
% |
≤0.3 |
≤0.3 |
≤0.3 |
Note: This is a 100A:3B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise.
Low viscosity,great flexibility,Extra low shrinkage,Chemical resistance,release properties
, Easy to work with,High tear strength,Heat Resistance,various color is available,High reproduction rate
When stored at or below 32°C (89.6°F) in the original unopened containers, C-8 series Silicone Base and its Curing Agents have a usable life of I0 months.
Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
Curing Agent: 30g/bottle; 1kg/bottle
Send product request
Other supplier products
 |
Platinum Cure liquid molding Silicone Rubber for rapid Prototyping | Platinum Cure liquid molding Silicone Rubber for rapid Prototyping Prototyping Silicone Features Application: GC RTV silicone G-8 series are gr... |
 |
wholesale price 2 parts mould making silicone rubber liquid for Tire Molding | wholesale price 2 parts mould making silicone rubber liquid for Tire Molding Tire Molding Silicone Features Application: GC RTV silicone G-8 se... |
 |
Cheap liquid silicone rubber to make molds for lost was casting | Cheap liquid silicone rubber to make molds for lost was casting Lost Wax Casting Silicone GC RTV silicone C-825 are good for lost wax casting. Th... |
 |
Tin cure liquid molding silicone rubber for plaster casting cornice mold | Tin cure liquid molding silicone rubber for plaster casting cornice mold Plaster Molding Silicone Plaster Ornamentation Molding silicone Plaster... |
 |
Skin safe liquid silicone rubber for mask making | Skin safe liquid silicone rubber for mask making Mask Making & Make Up FX Silicone RT-8 series silicone is great to make silicone mask produc... |
Same products
 |
Embossed Silicone Rubber Wristbands/Bracelets Bulk | Seller: Yppromotion | In addition to those ordinary wristband types, YP Promotion also has a novel technology that can ... |
 |
SILICONE BRACELET | Seller: Yppromotion | The silicone bracelet is made of solid silicone rubber pressed by an oil press. Wholesale persona... |
 |
Silicone Square ICE Cube Tray | Seller: Shenzhen YF Technology Co.,Ltd | The square ice cube mold is square in shape, square in shape and rectangular in shape. It is main... |
 |
Silicone Sports Bottle | Seller: Shenzhen YF Technology Co.,Ltd | Silicone Water Bottle Review Silicone sports bottle is resistant to high and low temperatures. I... |
 |
Silicone Sphere Tray | Seller: Shenzhen YF Technology Co.,Ltd | Environmental friendly material, food grade silicone, used for making various ice cubes, which ca... |
