.

Addition Silicone Rubber

GOLOHO heat cured silicone rubberproduces no by-products in the curing process, allowing their use in deep section and complete confinement.

GOLOHO Addition Silicone Rubber has two types, one is one-part type, the other is two-part.

The One-part addition one is heat-cured, thermally conductive adhesives. These adhesives will develop good, primerless adhesion to a variety of common substrates including metals, ceramics, epoxy laminate boards, reactive materials and filled plastics.

For most users, GOLOHO Addition Silicone Rubber should be operational over a temperature range of -45-200℃ for long periods of time. However, at both the low and high-temperature ends of the spectrum, the behavior of the materials and performance in particular applications can become more complex. So, the addition siliconeadditional tests to check its performance before use.

Long-term, reliable protection of sensitive circuits and components is important in many of today’s delicate and demanding electronic applications. Addition-cure silicone is heat cured silicone rubber, which should be cured at 100℃ or above the cure rate is rapidly accelerated with heat. Addition-curing materials contain all the ingredients needed for cure with no by-products from the cure mechanism. Deep-section or confined cures are possible. Cure progress evenly throughout the material. One-part addition-cure silicone rubber should be kept tightly closed at low temperature (below 5℃).

Two-part addition silicone rubber are room temperature or heat accelerated cure. When the two components are thoroughly mixed in a 1 to 1 mix ratio, cure reaction begins. Initially, cure is evidenced by a gradual increase in viscosity, followed by gelation and conversion to a solid, flexible elastomer, which is well suited for the protection of electrical/electronic applications. They cure without exotherm at a constant rate regardless of sectional thickness or degree of confinement. Thus, deep section and complete confinement are preferred. At the same time, no by-products are produced in the cure process. Two-part addition cure silicone rubber should be kept tightly against oxygen and moisture at room temperature.

GOLOHOgrease is a safe thermal conductive silicone grease which is inodorous, non-poisonous, no corrosion to common materials.



Send product request

To: GOLOHO POLYMER (CHANGZHOU) CO. LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

High Performance Silicone Adhesive/Sealant - 2402W
High Performance Silicone Adhesive/Sealant - 2402W FEATURES OF HEAT RESISTANT RTV SILICONE GLUE GOLOHO-2402W GOLOHO-2491 is a high-performance heat resistant RTV silicone gluefor electronics. &midd...
Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB
Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB FEATURES OF GOLOHO-4313-AB(also called two part silicone adhesive) Flammability,UL-94V0 certification Excellent resistance to high and low temperat...
Heat Resistant Silicone Adhesive/Sealant - 3912R
Heat Resistant Silicone Adhesive/Sealant - 3912R Heat Resistant Silicone Adhesive/Sealant - 3912R FEATURES OF GOLOHO-3912R ·UL certificated product(E254532) ·One-part RTV silicone ru...
Light/Moisture Cure Conformal Coating-L213
Light/Moisture Cure Conformal Coating-L213 FEATURES OF GOLOHO-L213 UV rapid cure secondary moisture cure one-component, 100% solid content low viscosity -55℃~120℃ temperature resistance: -55...
Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB
Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB FEATURES OF GOLOHO-4313-AB Flammability,UL-94V0 certification Excellent resistance to high and low temperature, weather, ultraviolet light and agin...
All supplier products

Same products

Embossed Silicone Rubber Wristbands/Bracelets Bulk
Embossed Silicone Rubber Wristbands/Bracelets Bulk Seller: Yppromotion In addition to those ordinary wristband types, YP Promotion also has a novel technology that can ...
SILICONE BRACELET
SILICONE BRACELET Seller: Yppromotion The silicone bracelet is made of solid silicone rubber pressed by an oil press. Wholesale persona...
Silicone Square ICE Cube Tray
Silicone Square ICE Cube Tray Seller: Shenzhen YF Technology Co.,Ltd The square ice cube mold is square in shape, square in shape and rectangular in shape. It is main...
Silicone Sports Bottle
Silicone Sports Bottle Seller: Shenzhen YF Technology Co.,Ltd Silicone Water Bottle Review Silicone sports bottle is resistant to high and low temperatures. I...
Silicone Sphere Tray
Silicone Sphere Tray Seller: Shenzhen YF Technology Co.,Ltd Environmental friendly material, food grade silicone, used for making various ice cubes, which ca...