.

AAK Hydraulic Valve Block Has Unique Anti-rust Technology, Russian Customer Tried A Small Order

AAK hydraulic valve has a proprietary valve block anti-rust treatment technology. A special coating with a thickness of 0.02 ~ 0.03 mm is plated on the surface of the hydraulic valve block. The coating has excellent adsorption, is not easy to fall off and has a bright appearance. On this point alone, it has crushed most of its peers. After several communications, Russian customer resolutely placed an order with AAK.

Due to the limitation of process, most hydraulic valve factories adopt surface painting or conventional electroplating for the anti-rust treatment of the hydraulic valve block surface. Such anti-rust treatment on the surface of the valve block will cause problems in the routine maintenance or repair of the hydraulic valve in the future. It is mainly reflected in that the valve block is easy to be scratched, causing corrosion and increasing system pollution. Besides, falling paint and other sundries are also easy to enter the valve block channel and bring pollutants directly to the system, resulting in secondary pollution of the system and accidents. The trouble is that it is generally difficult to find the problem of rust prevention on the surface of these valve blocks in the short term.

Anatoly, a Russian hydraulic customer, purchased a batch of hydraulic valve blocks in March from a factory. There were no problems in the preliminary test and final inspection. However, he continued to receive feedback from consumers in the last month. After setting up and debugging, the surface of the valve block fell off paint, rusted, and even there is pollution inside the system. According to the statistics of the information received, among the 200 products purchased, there are nearly 100 products in this situation now, and only 100 are still on sale. Anatoly found something wrong and immediately asked to suspend the sales of the remaining products. At the same time, he communicated with suppliers for many times for these inferior products, but the supplier's attitude was very bad and had always been unable to give accurate solutions.

Anatoly used to interact with us on the B2B platform. We didn't know the problems of his valve block until we received his last month. For these problems, we talked about the current hydraulic market in the reply to his . In order to save costs, many peers use very conventional anti-rust treatment on the valve blocks. There are mainly two processes:

  1. Directly paint the valve block surface after assembling the components. During component disassembly, replacement and maintenance, it is very easy to damage the paint around the component. At the same time, the fallen paint and other sundries are also easy to enter the valve block duct and cause system pollution

  1. After all the valve blocks are processed, a layer of oxide film plating is carried out. The surface oxide film is relatively thin, which is easy to be scratched, causing corrosion and increasing system pollution.

Anatoly asked if we have a way to eradicate it completely. We also encountered these similar valve block problems in the early stage. Our technical team did not follow the trend and insisted on new process exploration, so that AAK has its own unique anti-rust technology now. With the increasing requirements for product aesthetics and pollution control, AAK hydraulic valve adopts the proprietary valve block anti-rust treatment technology, electroplating a special coating with a thickness of 0.02 ~ 0.03 mm on the surface of the valve block. At the same time, the coating has excellent adsorption, not easy to fall off and has bright appearance. Only at this point, it has crushed most peers.

Perhaps Anatoly has already had a sense of trust in us. He sent their valve block drawings and also the valve blocks produced by last hydraulic valve factory, asking us to produce 500 trial orders directly according to these requirements, to make up for the stock shortage caused by the defective products.

AAK hydraulic valve block is free of rust and pollution. You can also try a small order!



Send product request

To: AAK INDUSTRY CO., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

5 Manufacturing Processes of AAK Hydraulic Valve Block, 5 Parameters Ahead of Peers Not Only 5 Steps
5 Manufacturing Processes of AAK Hydraulic Valve Block, 5 Parameters Ahead of Peers Not Only 5 Steps 5 Manufacturing Processes of AAK Hydraulic Valve Block, 5 Parameters Ahead of Peers Not Only 5 StepsAAK hydraulic valve block is manufactured stric...
AAK hydraulic valve filtration accuracy reaches 10μm, it is over 2 times higher than peers, and service life is also 2 years longer
AAK hydraulic valve filtration accuracy reaches 10μm, it is over 2 times higher than peers, and service life is also 2 years longer AAK hydraulic valve filtration accuracy reaches 10μm, it is over 2 times higher than peers, and service life is also 2 years longer 25μm is ...
AAK hydraulic valve spool never leaks, customer promoted to head of Spain headquarters in China
AAK hydraulic valve spool never leaks, customer promoted to head of Spain headquarters in China AAK hydraulic valve spool never leaks, customer promoted to head of Spain headquarters in ChinaFernado is a purchaser from a Spain company, respons...
Cliff Was Stunned! AAK Delivered The Urgent Order of The Hydraulic Diverter Valve From The Global Top 500 Enterprises 10 Days in Advance
Cliff Was Stunned! AAK Delivered The Urgent Order of The Hydraulic Diverter Valve From The Global Top 500 Enterprises 10 Days in Advance Cliff is a purchaser of a hydraulic valve company in the United States. He began to contact the domestic hydraulic valve industry in China a few ye...
A Small Hydraulic Check Valve Symbol Nearly Killed the Hydraulic Valve Manufacturer
A Small Hydraulic Check Valve Symbol Nearly Killed the Hydraulic Valve Manufacturer A tiny detail of the hydraulic check valve symbol direction is wrong, which put the hydraulic check valve manufacturer in a very difficult position...
All supplier products

Same products

The hardness of 65HRC valve spool impressed German customer, who repeated the order for AAK hydraulic valves nearly 5 times the quantity
The hardness of 65HRC valve spool impressed German customer, who repeated the order for AAK hydraulic valves nearly 5 times the quantity Seller: AAK INDUSTRY CO., LTD The valve spool hardness of AAK hydraulic flow valves reached 65HRC, the German customer Felix wa...
The ± 1 μ M error of inner hole accuracy convinced a Spanish customer, who repeated order for AAK hydraulic pressure valve 3 times a year
The ± 1 μ M error of inner hole accuracy convinced a Spanish customer, who repeated order for AAK hydraulic pressure valve 3 times a year Seller: AAK INDUSTRY CO., LTD Gerrard, a Spanish hydraulic customer who just repeated the order at the end of May, repeated ano...
After encountering Waterloo, Andy turned the tables at AAK, and repeated an order for hydraulic flow control valve yesterday
After encountering Waterloo, Andy turned the tables at AAK, and repeated an order for hydraulic flow control valve yesterday Seller: AAK INDUSTRY CO., LTD Just yesterday, I received a repeat order from Andy for a hydraulic flow control valve, which is ...
The 6th Proofing Successfully Matched The Quality of German Sample, Eaton Placed A Hydraulic Pressure Control Valve Order with AAK
The 6th Proofing Successfully Matched The Quality of German Sample, Eaton Placed A Hydraulic Pressure Control Valve Order with AAK Seller: AAK INDUSTRY CO., LTD It took 3 months and 6 proofing adjustments to match the sample quality of hydraulic pressure con...
The Hydraulic Pressure Reducing Valve With A Service Life of Only 3 Months Is Completely Different After AAK Took Over The Order
The Hydraulic Pressure Reducing Valve With A Service Life of Only 3 Months Is Completely Different After AAK Took Over The Order Seller: AAK INDUSTRY CO., LTD Recently, I received the second re-order of a hydraulic pressure reducing valve from French clien...