Asbestos Cement Sheet
Asbestos cement sheet is weatherproof, durable, corrosion-resist, heat insulating. All these properties contribute it an ideal construction material.Three types of asbestos cement products at stock - flat sheet, corrugated sheet and coated corrugated sheet.Flat sheetFlat sheet is mainly applied for equipment and constructions. In steel making factory, it can be used in vacuum furnace, smelting furnace, heating equipment for its exceptional thermal insulation. In constructions, it can be used in commercial buildings, shopping malls, hotels, factories, warehouses, tunnels, theaters, stations and hospitals. Asbestos cement sheet has a collection of fire insulation, waterproof, noise insulation, Physical and technical specificationsLength 1750 ��10mm
Width 1110 ��6mm
Thickness 8-10 ��1.0mm
flexural strength �� 18.0 MPa
Density �� 1.6 g / cm3
Impact strength �� 2.0 kJ / m2
Frost resistance 25 cycles
Residual strength ��90%
Corrugated sheet Corrugated sheets, or roofing sheets, are widely used in attic roofs, furnace curtain, residence, public and agricultural buildings. Physical and technical characteristicsLength 1750 ��15mm
Width 1130 ��5mm
Thickness 5.8 ��0.3mm
Ordinary wave height 40 ��4.0mm
Overlapping wave height 40 ��6.0mm
Overlapped wave height, mm 32 ��6.0mm
The width of the overlapping wave 43 ��7.0mm
Width overlapped wave 37mm
Step wave 150mm
The flexural strength not less than 16.0
Density (bulk density) �� 1.6 MPa
Impact strength �� 1.50kJ / m2
Frost resistance 25 cycles
Water resistance �� 24 hours
Residual strength �� 90%
Coated sheet
Coated sheet is coated with colorful polymer which adds fashion elements to buildings, such as attic roofs, schools, theaters and so on.
Coated asbestos sheet decorate your properties Coated asbestos cement corrugated sheet, 1750��1110mm, 5.8mm
Physical and technical propertiesLength 1750 ��15mm
Width 1130 ��5mm
Thickness 5.8 ��0.3mm
Ordinary wave height 40 ��4.0mm
Overlapping wave height 40 ��6.0mm
Overlapped wave height, mm 32 ��6.0mm
The width of the overlapping wave 43 ��7.0mm
Width overlapped wave 37mm
Step wave 150mm
The flexural strength not less than 16.0 MPa
Density (bulk density) ��1.6 g / cm3
Impact strength �� 1.50kJ / m2
Frost resistance 25 cycles
Residual strength,% �� 90%
Adhesion of the polymer coating to the sheeting, MPa �� 1.0 MPa
Appearance no cracks, bubbles, bundles
Color fastness �� E (A, B, L)
Heat resistance of the polymer coating sheets 100% for 2 hours
Mark on frost resistance F 50, F 75, F 100 No change the look of the polymer coating
Other supplier products
|
|
Asbestos Rope |
Asbestos rope - twisted, square and lagging
Asbestos rope is made of braided asbestos fiber and its section tends to be round, rectangle or square.... |
|
|
Oil-resistant Paronite |
Oil-resistant paronite sheet is a blend of compressed long asbestos fiber, oil-resistant synthetic rubber, heat-resistant filler. It is mainly for ... |
|
|
Asbestos Packing |
Asbestos packing with graphite
It is fabricated by asbestos threads impregnated with dry graphite, and the outermost is coated with 100% graphite. ... |
|
|
Compressed Asbestos Gasket |
Compressed asbestos gasket is a compressed mixture of long fiber asbestos, synthetic rubber and other modifying materials. According to different f... |
|
|
Asbestos Cement Pipes |
Versatile asbestos cement pipes
Asbestos cement pipe, length 4m, internal diameter 300mm
Asbestos cement pipes are made of high-grade cement rein... |
All supplier products
Same products
