Cyto Centrifuge
Maintenance ofCyto Centrifuge
1. Before the centrifuge is operated, the power should be cut off and the centrifuge brake should be loosened first. You can manually turn the drum to see if there is any biting.
2. Check for looseness and abnormality in other parts;
3. Turn on the power and start the drive in a clockwise direction (usually about 40-60 seconds from the stationary state to the normal operation);
4. Usually, after each equipment arrives at the factory, it must be empty for about 3 hours, and it can work without abnormal conditions;
5. The material should be placed as evenly as possible;
6. Must be operated by special personnel, the capacity must not exceed the rated amount.
7. It is strictly forbidden to operate the machine so as not to affect the service life of the machine;
8. After the machine is started, if there is any abnormal situation, it must be stopped to check and repair and repair if necessary;
Email:
Send product request
Other supplier products
 |
The maintenance of Refrigerated high-speed centrifuge | Refrigerated high-speed centrifugeintroduction: With refrigeration, generally at 4 degrees centrifugation, the lowest temperature that the machine ... |
 |
Micro hematocrit centrifuge definition | The hematocrit centrifuge is used to determine the fraction of blood cells in the blood. The blood in the capillary has required to centrifuge to t... |
 |
Technical indicators of the Refrigerated high-speed centrifuge | TheRefrigerated high-speed centrifugecan perform liquid clarification and solid particle enrichment, or liquid-liquid separation. These separators ... |
 |
Experimental results of a refrigerated high speed centrifuge | The results of aRefrigerated high-speed centrifugewill be announced again. After the experiment, the customer said: "I was very satisfied with the ... |
 |
Large capacity centrifuge | large capacity centrifugebrushless inverter motor drive, microcomputer control, touch panel, programmable operation. With rotor identification func... |
