Cyto Centrifuge
Maintenance ofCyto Centrifuge
1. Before the centrifuge is operated, the power should be cut off and the centrifuge brake should be loosened first. You can manually turn the drum to see if there is any biting.
2. Check for looseness and abnormality in other parts;
3. Turn on the power and start the drive in a clockwise direction (usually about 40-60 seconds from the stationary state to the normal operation);
4. Usually, after each equipment arrives at the factory, it must be empty for about 3 hours, and it can work without abnormal conditions;
5. The material should be placed as evenly as possible;
6. Must be operated by special personnel, the capacity must not exceed the rated amount.
7. It is strictly forbidden to operate the machine so as not to affect the service life of the machine;
8. After the machine is started, if there is any abnormal situation, it must be stopped to check and repair and repair if necessary;
Email:
在线联系供应商
Other supplier products
 |
Refrigerated High Speed Centrifuge | Refrigerated High Speed Centrifugeis suitable for the qualitative analysis of serum, plasma and urea in medical products, bloodstains, clinical tri... |
 |
PRP (platelet rich plasma) centrifuge | BIORIDGE PRP (platelet rich plasma) centrifuge is not only used in the beauty of the centrifuge is also used in the Department of orthopedics, diab... |
 |
Development opportunities for large capacity centrifuges | In view of the current development of theLarge capacity centrifugeindustry, we want to develop faster and more stable in this industry: 1. Streng... |
 |
Experimental results of a refrigerated high speed centrifuge | The results of aRefrigerated high-speed centrifugewill be announced again. After the experiment, the customer said: "I was very satisfied with the ... |
 |
Pharmaceutical centrifuge | How to use a pharmaceutical centrifuge (1) Before use, first check whether the mechanical parts are in good condition. (2) The level meter wa... |
Same products
 |
ETH Ethereum Jasminer X4 BRICK ASIC Miner | 卖方: Shenzhen Dovina Electronic Co.,Ltd | Jasminer X4 Brick Review Jasminer x4 brick for salefrom Jasminer mining EtHash algorithm with a ... |
 |
ETH Ethereum Jasminer X4-1U ASIC Miner | 卖方: Shenzhen Dovina Electronic Co.,Ltd | TheJasminerx4-u1 miner has a different look than the X4 mining unit. So you get a miner with a sl... |
 |
ETH Ethereum Jasminer X16 ASIC Miner | 卖方: Shenzhen Dovina Electronic Co.,Ltd | Model X16Qfrom Jasminer mining EtHash algorithm with a maximum hashrate of 1.845Gh/s for a power ... |
 |
ETH Ethereum iPollo V1 Mini SE Plus ASIC Miner | 卖方: Shenzhen Dovina Electronic Co.,Ltd | Model V1 Mini SE Plusfrom iPollo mining EtHash algorithm with a maximum hashrate of 400Mh/s for a... |
 |
ETH Ethereum iPollo V1 Mini SE ASIC Miner | 卖方: Shenzhen Dovina Electronic Co.,Ltd | Model V1 Mini SEfrom iPollo mining EtHash algorithm with a maximum hashrate of 200Mh/s for a powe... |
