Fluxes for Aluminum Alloy
General Description:
Aluminum alloys containing more than 2 % magnesium become brittle with sodium.
Feature: This flux is a compact covering and cleaning granulated flux to remove the sodium in the aluminum melting. It generates low dust and low fume during application. It reacts quickly with molten aluminum and removes the alkali metal (Ca, Na, Li, Sr) and non-metallic inclusions (oxides, carbides, borides) and degassing.
Function:
After fusing completed the flux are cooled and they are crushed or ground into ccustomerized particle size.
degassing when injected flux with Argon or Nitrogen.
Applied range:
This flux is used in hypo-eutectic aluminum alloys including those contain high magnesium alloy.
Chemical compositions
Mgcl2 Anhydrous , Potassium Chloride , CaF2 and other salt
Melting Point: 432°C & 483°C
Size of Sodium-Free Refining Flux
Granule 0.8-3.25mm, 1-3mm,Other size can be adjusted according to custom
Package: 1. 2.0kg or 2.5kg or 5kg heat sealed polyethylene (PE) bags into 20 or 25kgs bags or cartons with or without pallet
Advantage:
1) Eco‐friendly flux that reduce dust levels, meet the emission limits of most environmental regulatory agencies
2) Uniform size, reacts fully. Purify the melt improve melt quality.
3) Increases the extrusion speed and die life when extruding profiles
4) Reduces the number of breaks in continuous casting
5) Eliminates edge cracks when rolling high Mg aluminium alloys
6) Free of fluorides. Zero fluoride emissions.
7) Low melting point for rapid dispersion
8) Low application rates, typical 0.15-0.2% of MT aluminium
Notice:
Sodium-free flux should be added to the melt at the temperature of 690-750 Degree Celcius. The recommended application rate should be 0.1 to 0.2% of the melt size. Rebel the melt and remove the dross from the top of the molten metal.
Send product request
Other supplier products
 |
Drossing Flux | Drossing Flux (SATA-PF-310) Description of Drossing Flux (SATA-PF-310) SATA drossing fluxis specially developed for removing the slag from the alum... |
 |
Furnace Cleaning Flux | General Description & Functions of Furnace Cleaning Flux Furnace cleaning flux can remove oxide build-up from furnace wall due to its strong e... |
 |
Degassing Flux | Degassing Flux(SATA-PF-350) General Description of Degassing Flux (SATA-PF-350) Practice has proved that the hydrogen is the main cause of the pore... |
 |
Fluxes for Magnesium Alloy | Magnesium alloy has a low melting point and small heat capacity. When heated in the air, it gets oxidized fast, and it is easy to burn when overhea... |
 |
Master Alloy | Master AlloyManufacturer Description of Master Alloy SATA-Master alloys melt at a lower temperature as compared to primary metals. Controlled addit... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Common Rail injector control valve F00VC01200 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Injector Control Valve Plate 24# | Seller: China Lutong Part Plant | Injector Control Valve Plate 24# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
 |
Injector Control Valve Plate 12# | Seller: China Lutong Part Plant | Injector Control Valve Plate 12# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
