Fluxes for Aluminum Alloy
General Description:
Aluminum alloys containing more than 2 % magnesium become brittle with sodium.
Feature: This flux is a compact covering and cleaning granulated flux to remove the sodium in the aluminum melting. It generates low dust and low fume during application. It reacts quickly with molten aluminum and removes the alkali metal (Ca, Na, Li, Sr) and non-metallic inclusions (oxides, carbides, borides) and degassing.
Function:
After fusing completed the flux are cooled and they are crushed or ground into ccustomerized particle size.
degassing when injected flux with Argon or Nitrogen.
Applied range:
This flux is used in hypo-eutectic aluminum alloys including those contain high magnesium alloy.
Chemical compositions
Mgcl2 Anhydrous , Potassium Chloride , CaF2 and other salt
Melting Point: 432°C & 483°C
Size of Sodium-Free Refining Flux
Granule 0.8-3.25mm, 1-3mm,Other size can be adjusted according to custom
Package: 1. 2.0kg or 2.5kg or 5kg heat sealed polyethylene (PE) bags into 20 or 25kgs bags or cartons with or without pallet
Advantage:
1) Eco‐friendly flux that reduce dust levels, meet the emission limits of most environmental regulatory agencies
2) Uniform size, reacts fully. Purify the melt improve melt quality.
3) Increases the extrusion speed and die life when extruding profiles
4) Reduces the number of breaks in continuous casting
5) Eliminates edge cracks when rolling high Mg aluminium alloys
6) Free of fluorides. Zero fluoride emissions.
7) Low melting point for rapid dispersion
8) Low application rates, typical 0.15-0.2% of MT aluminium
Notice:
Sodium-free flux should be added to the melt at the temperature of 690-750 Degree Celcius. The recommended application rate should be 0.1 to 0.2% of the melt size. Rebel the melt and remove the dross from the top of the molten metal.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Anhydrous Magnesium Chloride | Magnesium Chloride Anhydrous (AMC) General Description of Magnesium Chloride Anhydrous (AMC) Name: Magnesium Chloride Anhydrous (AMC) By-product of... |
 |
Covering Flux-Csf2 | C sf2 is an alkaline-based, sodium-free flux. It is a smoke-generating cover flux for all aluminum alloys, especially silicon-aluminum. It is used ... |
 |
Drossing Flux | Drossing Flux(SATA-PF-310) Description of Drossing Flux (SATA-PF-310) SATA drossing flux also name aluminum drossing fluxis specially developed for... |
 |
AlF3 | General Description: Molecular Formula: AlF3 CAS NO.:7784-18-1 Bulk Density: 1.51g/l Specific Gravity: 2.88g/cm3 Solubility: Soluble in water sligh... |
 |
Fluxes for Aluminum Alloy | Granular FluxGeneral Introduction: SATA granulated fused refining flux is a eutectic salt composed of mgcl2 anhydrous and potassium or sodium chlor... |
Похожие товары
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Продавец: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Продавец: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina#Stainless Steel Cylindrical Pin##Denso Common... |
 |
Common Rail injector control valve F00VC01200 | Продавец: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina#Stainless Steel Cylindrical Pin##Denso Common... |
 |
Injector Control Valve Plate 24# | Продавец: China Lutong Part Plant | Injector Control Valve Plate 24# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |
 |
Injector Control Valve Plate 12# | Продавец: China Lutong Part Plant | Injector Control Valve Plate 12# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |
