Mechanical Dosing Pump
Mechanical Dosing Pump
The mechanical diaphragm metering pumpis a motor that drives a worm gear pair to make a variable speed movement through a direct drive. Under the action of a crank connecting rod mechanism, the rotary motion is converted into a reciprocating linear motion. The so-called diaphragm metering pump uses a specially designed and processed flexible diaphragm to replace the traditional piston, and realizes reciprocating motion under the action of the driving mechanism, thereby completing the suction to discharge process. Due to the isolation effect of the diaphragm, the isolation between the metered fluid and the driving lubrication mechanism is truly realized in structure. Since its diaphragm bears the pressure on the medium side, the maximum discharge pressure of a mechanical diaphragm pumpgenerally does not exceed 1.2MPa.
① When the diaphragm is pulled back, the outlet ball valve falls down and tightly fits the ball seat. The inlet ball valve floats upward due to the vacuum generated between the diaphragm and the pump head when the diaphragm is pulled back, and the liquid is sucked up.
②When the diaphragm is pushed forward, the inlet ball valve is airtight with the ball seat to prevent liquid from passing through, and the outlet is pushed forward by the diaphragm to open the ball valve and the liquid is discharged.
①the ball seat and ball valve cannot be airtight
②the entrance and exit are blocked by foreign matter
③diaphragm damage.
Therefore, when the liquid is conveyed abnormally, the problem should be solved in this direction, and the factors that cause the above situation are too numerous to list, depending on the piping, fittings and operating conditions at the time.
Features Of Mechanical Diaphragm Metering Pump
(1) Lower price;
(2) No dynamic seal and no leakage;
(3) It can transport high-viscosity media, abrasive slurries and hazardous chemicals;
(4) The diaphragm bears high stress and the diaphragm life is relatively low;
(5) The outlet pressure is below 3MPa, and the measurement accuracy is ±2%;
(6) No safety relief device.
How To Install A Mechanical Diaphragm Metering Pump?
The mechanical diaphragm metering pump is supported by a solid, anti-vibration foundation. The foundation is higher than the ground, one side of which is washed by water, and is also easy to repair. Enough space around the mechanical diaphragm metering pump is reserved to facilitate pump maintenance and adjustment.
There are mounting holes at the bottom of the mechanical diaphragm metering pump for mounting anchor bolts.
The mechanical diaphragm metering pump installed outdoors should be covered by a canopy.
Ark Electric & Mechanical Co., Ltd.is a professional dosing metering pumps manufacturers, we provide swimming pool dosing pump, metered dose pump, automatic metering pump, single diaphragm dosing pump and etc. Want to know dosing pump typesor more? Please contact us.
Send product request
Other supplier products
 |
Manual Dosing Pump | Manual Dosing Pump Introduction Of Manual Metering Pump The flow rate of the dosing pump manualis constant and can be manually adjusted. The flow ... |
 |
High Pressure Dosing Pump | High pressure dosing pumpare useful in many occasions of technology, and high pressure and mass flow are the typical features of it. However, high ... |
 |
Diaphragm Pump | Introduction of Diaphragm Pumps The Diaphragm Pump of NEWDOSE can make the operation of it more safe and reliable by adding auxiliary valves and a... |
 |
Mechanical Dosing Pump | Mechanical Dosing Pump The mechanical metering pump is a motor that drives a worm gear pair to make a variable speed movement through a direct dri... |
 |
Pulp And Paper Pumps | In the field of papermaking, polyacrylamide which is short for PAM is widely used as a retention aid, filter and evenness agent in order to improve... |
Same products
 |
Microcrystalline wax used for rubber plastic processing and modification | Seller: Syntop chemical Co.,Ltd. | Microcrystalline wax has a wide range of industrial applications, primarily in the areas of rubbe... |
 |
Microcrystalline wax 80A used for lubrication and demolding | Seller: Syntop chemical Co.,Ltd. | The core industrial applications of microcrystalline wax 80A are primarily focused on rubber prot... |
 |
Tyvek Flat Roll Pouch | Seller: Hopeway AMD | Tyvek Flat Roll Pouch is designed for professional sterilization packaging, offering clean handli... |
 |
Industrial Warehouse Ceiling Fans | Seller: Hebei Windmax Power Technology Co., Ltd. | Industrial Warehouse Ceiling Fans Industrial Warehouse Ceiling Fans for Warehouses, Logis... |
 |
HVLS Ceiling Fan for Railway Station | Seller: Hebei Windmax Power Technology Co., Ltd. | HVLS Ceiling Fan for Railway Station for Railway Station All units are CE-certified, manufa... |
