100G QSFP28 AOC
T&S Communication TSQS-851HG-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+SR4 for 100 or 40 Gigabit Ethernet, Infiniband FDR/EDR Applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnects applications. It integrates four data lanes in each direction with 100 Gbps bandwidth. Each lane can operate at 25Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP(MPO) connector.
Features of China100G QSFP28 AOC
Four-channel full-duplex active optical cable with QSFP28 plugs
Produced by T&S, a professional AOC manufacturer, the 100G QSFP series has multi-rate capability: 10Gb/s and 25Gb/s per channel
Reliable VCSEL array technology using MMF
Hot Pluggable
Power dissipation:<3.5W
Operating case temperature 0℃ to 70℃
RoHS compliant
Applications of 100G QSFP28 AOC
IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4 28G Fiber Channel
Infiniband FDR/EDR
Specifications of 100G QSFP28 AOC
Absolute Maximum Ratings
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
Storage Temperature |
TS |
-20 |
85 |
℃ |
|
Case Operating Temperature |
TCase |
0 |
70 |
℃ |
|
Relative Humidity |
RH |
0 |
85 |
% |
|
Supply Voltage |
VCC |
-0.5 |
V |
Recommended Operating Conditions
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Case Operating Temperature |
TCase |
0 |
- |
70 |
℃ |
|
Humidity |
RH |
5 |
- |
85 |
- |
|
Supply Voltage |
VCC |
V |
|||
|
Data Rate Per Lane |
DR |
- |
- |
Gbit/s |
|
|
Fiber Bend Radius |
Rb |
3 |
- |
- |
cm |
Electrical Characteristics
NOTE: The EDR module requires an electrical connector compliant with SFF-8662 or SFF-8672 be used on the host board to guarantee its electrical interface specification. Please check with your connector supplier
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Supply Voltage |
VCC |
- |
V |
||
|
Supply Current |
ICC |
- |
- |
1010 |
mA |
|
Total Power Dissipation1,2 |
P |
- |
- |
W |
|
|
Transmitter |
|||||
|
Differential Input Voltage |
Vin |
- |
- |
900 |
MVP-p |
|
Differential Termination Resistance Mismatch |
- |
- |
- |
10 |
% |
|
Transition Time, 20 to 80% |
Tr, Tf |
10 |
- |
ps |
|
|
Receiver |
|||||
|
Differential Output Voltage |
Vout |
- |
- |
900 |
MVP-p |
|
Differential Termination Resistance Mismatch |
- |
- |
- |
10 |
% |
|
Transition Time, 20 to 80% |
Tr, Tf |
- |
- |
ps |
|
|
Bit Error Rate3 |
BER |
- |
- |
10-12 |
- |
Note:
Maximum total power value is specified across the full temperature and voltage range
Settable in various discrete steps via the I2C interface
BER=10-12, PRBS
TS Communicationis a professional optical fiber manufacturer, we provide optical communications products, 100g aoc cableand etc. Want to know 100g aocor more? Please contact us.
Send product request
Other supplier products
| FIBER BRAGG GRATING | As the "Optical Fiber Sensing Engineering Technology R&D Center of Guangdong Province ", T&S fiber bragg grating manufacturertakes the fron... | |
| SFP28 25G LR | T&S TSSP-3125G-LR is a single-Channel, Pluggable, Fiber-Optical SFP28 for 25 Gigabit Ethernet Applications. It is a high-performance module for... | |
| LC/SC LOOPBACK | LC or SC loopback or other customized, SM and MM fiber type for option, optical information routine exchange or test and equipment required, LC loo... | |
| 25G SPF28 AOC | 25GSFP28 AOC TSCommunicationTSSP-8525G-xxxC is a single-Channel, Pluggable, Fiber-Optic SPF28for 25 Gigabit Ethernet and Infiniband EDR Applicatio... | |
| 10G SFP+ DAC | SFP+ Direct Attach Cables are compliant with the SFF-8431, SFF-8432 and SFF-8472 specifications. Various choices of wire gauge are available from 3... |
Same products
| FT wax used for EVA-based hot melt adhesive | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... | |
| high melting point FT wax improve the heat resistance of adhesives | Seller: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... | |
| For hot melt adhesive high melting point FT WAX | Seller: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... | |
| Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19A | Seller: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... | |
| High melting point FT wax used as plastic processing additives | Seller: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |













