100G QSFP28 DIRECT ATTACH CABLE
QSFP28 Direct Attach Cables are compliant with the SFF-8665 specifications. Various choices of wire gauge are available from 30 to 26 AWG with various choices of cable length (up to 5m).
Features of 100G Direct Attach Cable
Up to 25.78Gbps data rate per channel
Up to 5m transmission
Hot-pluggable QSFP+ 38 PIN footprint
Compatible to SFF-8665
Compliant with IEEE 802.3bj
Single 3.3V power supply
Temperature Range: 0~ 70 °C
RoHS compliant
Applications of 100G QSFP28 Direct Attach Cable
Low EMI radiation switches, servers and routers
Data center networks
Storage area networks
High performance computing
Telecommunication and wireless infrastructure
Medical diagnostics and networking
Test and measurement equipment
Specifications of 100G QSFP28 Direct Attach Cable
Mechanical Specifications
|
Parameter |
Minimum |
Typical |
Maximum |
Unit |
|
Cable Diameter (26AWG) |
- |
- |
Inches |
|
|
Bend Radius (26AWG) |
- |
- |
Inches |
|
|
Cable Diameter (28AWG) |
- |
- |
Inches |
|
|
Bend Radius (28AWG) |
- |
- |
Inches |
|
|
Cable Diameter (30 AWG) |
- |
- |
Inches |
|
|
Bend Radius (30 AWG) |
- |
- |
Inches |
|
|
Within Pair Skew |
- |
- |
100 |
ps/10m |
|
Cable Insertion Loss |
- |
- |
dB/5m |
|
|
Bulk Cable Time Delay |
- |
- |
ns/m |
|
|
Bulk Cable Impedance |
95 |
100 |
105 |
Ohms |
|
Insertion Force |
- |
- |
40 |
N |
|
Withdrawal Force |
- |
- |
30 |
N |
|
Retention Force |
90 |
- |
- |
N |
|
Durability |
50 Cycles |
- |
- |
- |
Ordering Information
|
P/N |
Length |
Data Rate |
AWG |
Length Tolerance |
|
TSQS-PC1HG-01M |
1M |
100G |
28 / 30 |
+3.5/-3.5cm |
|
TSQS-PC1HG-02M |
2M |
100G |
28 / 30 |
+3.5/-3.5cm |
|
TSQS-PC1HG-03M |
3M |
100G |
28 / 30 |
+4/-4cm |
|
TSQS-PC1HG-05M |
5M |
100G |
26 |
+6/-6cm |
Recommended Operation Condition of 100G QSFP28 Direct Attach Cable
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
Operating Case Temperature |
Topc |
0 |
70 |
degC |
|
Storage Temperature |
Tst |
-40 |
85 |
degC |
|
Relative Humidity (non-condensation) |
RS |
35 |
60 |
% |
|
Supply Voltage |
VCC3 |
V |
||
|
Voltage on LVTTL Input |
Vilvttl |
-0.3 |
VCC3 +0.2 |
V |
|
Power Supply Current |
ICC3 |
15 |
mA |
|
|
Total Power Consumption |
Pd |
- |
W |
Notes:
Stress or conditions exceed the above range may cause permanent damage to the device.
This is a stress rating only and functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not applied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
As one of the mostprofessional fiber optic accessories suppliers, we provide optical communications products, qsfp28 patch cord, qsfp28 aoc cable, qsfp28 fiber cableand etc. Want to know more? Please contact us.
Send product request
Other supplier products
 |
40G QSFP+ AOC | 40G QSFP+ AOC T&S Communication TSQS-8540G-xxxC is a four-channel, pluggable, and parallel fiber-optic QSFP+SR4 for 40-gigabit ethernet and it... |
 |
100G QSFP28 AOC | T&S FWDMDevice is a product that can customize the transmission band or the reflection band within the wavelength range of 1260-1680nm; it can ... |
 |
AOC / DAC / TRANSCEIVER | Along with passive optical components, active optical components are indispensable elements of an optical network. T&S Communications adopts un... |
 |
FIBER OPTIC ATTENUATOR | Optical fixed optical attenuatoris composed of attenuation optical fiber, attenuator kits, connector kits and cables, Attenuator is used to attenua... |
 |
Fiber Stub | Fiber Stub is a ceramic (zirconia) capillary assembled with optical fiber. It is the most important component when connecting receptacle Modules su... |
Same products
 |
FT wax used for EVA-based hot melt adhesive | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | Seller: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | Seller: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19A | Seller: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | Seller: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
