Mud Pump
F Series Triplex Mud Pump is designed according to Emsco F series mud pump, its expendable parts at the fluid end are interchangeable with the parts that are in conformity with API Spec.
Features of F Series Triplex Mud Pump:
A solid and compact structure, miniature volume, good and reliable performance, which can meet the drilling requirements such as high pump pressure and big displacements in the oil field.
F series mud pump has a longer stroke and can be operated at a lower stroke, thus improved the water supplying performance effectively and extended the lifetime of expendable parts in the fluid end greatly.
The suction pulsation dampener has an advanced structure which is reliable to use and can make the pump realize its best suction performance.
The power end uses combined lubricating system of forced lubrication and splash lubrication. Reliable to lubricate and promote the service life of power end.
This series mud pumps are widely used in the oilfields and other industrial mining enterprises for well drilling and well repairing etc.
This series mud pump are strictly manufactured according to API Spec 7k “the Equipment Specification of Well Drilling and Repairing”, and are tested accordingly when leave factory.
Specification:
Model F-500 F-800 F-1000 F-1300 F-1600
Type Triplex single acting Triplex single acting Triplex single acting Triplex single acting Triplex single acting
Rated Power 373kw
500HP 596kw
800HP 735kw
1000HP 969kw
1300HP 1193kw
1600HP
Rated Speed 165 SPM 140 SPM 140 SPM 120 SPM 120 SPM
Stroke(mm/inch) 190/7 1/2″ 254/10″ 254/10″ 305/12″ 305/12″
Max.Liner Dia. 170/6 3/4″ 170/6 3/4″ 170/6 3/4″ 180/7″ 180/7″
Gear Type Herringbone Herringbone Herringbone Herringbone Herringbone
Valve Pot API-5﹟ API-6﹟ API-6﹟ API-7﹟ API-7﹟
Gear Ratio 4.286:1 4.207:1 4.207:1 4.206:1 4.206:1
Suction Inlet 203/8″ 305/12″ 305/12″ 305/12″ 305/12″
Discharge Inlet 4″Flange
5000 psi 5″Flange
5000 psi 5″Flange
5000 psi 5″Flange
5000 psi 5″Flange
5000 psi
Lubrication Forced&
Splash Forced&
Splash Forced&
Splash Forced&
Splash Forced&
Splash
Max. Pressure 27.2Mpa
3945 psi 34.5Mpa
5000 psi 34.5Mpa
5000 psi 34.5Mpa
5000 psi 35Mpa
5080 psi
Overall Size(in) 144*106*86 163*89*70 163*89*70 174*121*78 181*129*106
Weight(kg) 9770 18790 18790 24572 24791
Note: 1. Ratings are based on 100% volumetric efficiency and 90% mechanical efficiency.
2. Recommended strokes and input powers are under continuous operations.
Other supplier products
|
|
Grapple Releasing Spear |
Grapple Releasing Spear Type LM is a simply constructed and high strength fishing tool by which fishing job is performed through the interior bore ... |
|
|
Substructure |
1. The substructure is divided into prizing-trailers, truck-mounted, entrusted Pack, me block, double-up, spin-up, and so on.
2. Box-block struc... |
|
|
Pipe fittings |
Tee joints(including straight tee joints and reducing tee joints)
Nominal diameter Wall thickness Steel Grade
250~1500 10~120 X80 and below
Elbo... |
|
|
Heavy Weight Drill Pipe |
Heavy Weight Drill Pipe
Integral or Weld Heavy Weight Drill Pipe
Standard: API Spec 7
Specification: OD 3 1/2”, 4 1/2”, 5”, 5 1/2”
Material: AISI 4... |
|
|
Junk Mills |
The junk mill are designed to mill away metal objects, such as alloy-steel packers, squeeze tool, perforating guns, drill pipe, tool joints, reamer... |
All supplier products
Same products
