SHOCK ABSORBER
Type SJ
Shock Absorber Type SJ should be connected with the drilling string close to the bit. It can reduce or absorb both longitudinal and circumferential vibration of the drilling string in drilling operations. It can achieve the optimum combination of drill pressure and drill speed, reduce the drilling cost and promote the drilling efficiency.
Hydraulic Shock Absorber Type YJ
Hydraulic Shock Absorber Type YJ should be connected with the drilling string close to the bit. It can absorb or reduce axial vibration and thrust load of the drilling string, and have a good result for prolonging the service life of the bit and protecting the drilling tools as well as surface equipment.
Mechanical-Hydraulic Shocker Absorber Type DHJ
Mechanical-Hydraulic Shocker Absorber Type DHJ is a new type double-acting shock absorber. It absorbs the pulsation and shock from drill tools by compressing spring and silicon oil to store the energy. This shock absorber has advantages of good maintainability, bearing high load and long service life.
Specifcation of Mechanical-Hydraulic Shocker Absorber Type DHJ
TYPE OD in(mm) ID in(mm) Tool Joint Connection
API Max. Tensile Load Lbf(N) Max. Drill Pressure Lbf(N) Max. WorkingTorque Lbf-ft(N•m) Max. Stroke in(mm) Ambient Temp.
℃ Overall Length “Extended” ft-in(mm)
DHJ121 4-3/4
(121) 1-1/2
(38) 3-1/2REG 220,320
(980,000) 89,920
(400,000) 7,370
(10,000) 4
(100) -40℃
~ +150℃ 11’ 2”
(3,400)
DHJ159 6-1/4
(159) 2
(51) NC46 337,230
(1,500,000) 134,890
(600,000) 10,840
(14,700) 4-3/4
(121) 13’ 10”
(4,210)
DHJ178 7
(178) 2-1/4
(57.2) NC50 337,230
(1,500,000) 134,890
(600,000) 10,840
(14,700) 4-3/4
(121) 13’ 10”
(4,210)
DHJ203 8
(203) 2-13/16
(71.4) 6-5/8REG 449,640
(2,000,000) 157,370
(700,000) 14,450
(19,600) 5-1/2
(140) 15’ 5”
(4,700)
Other supplier products
|
|
DrawWorks |
The Single-shaft Electric Drawwork:
The drawwork is single-shaft with grooved drum structure, has less spare parts, small cubage, light weight co... |
|
|
Heavy Weight Drill Pipe |
Integral or Weld Heavy Weight Drill Pipe
Standard: API Spec 7
Specification: OD 3 1/2”, 4 1/2”, 5”, 5 1/2”
Material: AISI 4145H Alloy Steel and ... |
|
|
Crown Block |
Crown Block
The crown frame is made of high strength steel shapes.
Sheave grooves are hardened by medium frequency induction to provide extended ... |
|
|
Wellhead & X-mas Tree Assembly |
The well head assembly consists of three parts; casing head, tubing head and Christmas tree, which is mainly used to control the pressure of produc... |
|
|
Derrick (Mast) |
Derrick is divided into A, K, the tower type, masts and other types of packages.
1. A cross-section of a derrick thigh, such as rectangular or tr... |
All supplier products
Same products
