SHOCK ABSORBER
Type SJ
Shock Absorber Type SJ should be connected with the drilling string close to the bit. It can reduce or absorb both longitudinal and circumferential vibration of the drilling string in drilling operations. It can achieve the optimum combination of drill pressure and drill speed, reduce the drilling cost and promote the drilling efficiency.
Hydraulic Shock Absorber Type YJ
Hydraulic Shock Absorber Type YJ should be connected with the drilling string close to the bit. It can absorb or reduce axial vibration and thrust load of the drilling string, and have a good result for prolonging the service life of the bit and protecting the drilling tools as well as surface equipment.
Mechanical-Hydraulic Shocker Absorber Type DHJ
Mechanical-Hydraulic Shocker Absorber Type DHJ is a new type double-acting shock absorber. It absorbs the pulsation and shock from drill tools by compressing spring and silicon oil to store the energy. This shock absorber has advantages of good maintainability, bearing high load and long service life.
Specifcation of Mechanical-Hydraulic Shocker Absorber Type DHJ
TYPE OD in(mm) ID in(mm) Tool Joint Connection
API Max. Tensile Load Lbf(N) Max. Drill Pressure Lbf(N) Max. WorkingTorque Lbf-ft(N•m) Max. Stroke in(mm) Ambient Temp.
℃ Overall Length “Extended” ft-in(mm)
DHJ121 4-3/4
(121) 1-1/2
(38) 3-1/2REG 220,320
(980,000) 89,920
(400,000) 7,370
(10,000) 4
(100) -40℃
~ +150℃ 11’ 2”
(3,400)
DHJ159 6-1/4
(159) 2
(51) NC46 337,230
(1,500,000) 134,890
(600,000) 10,840
(14,700) 4-3/4
(121) 13’ 10”
(4,210)
DHJ178 7
(178) 2-1/4
(57.2) NC50 337,230
(1,500,000) 134,890
(600,000) 10,840
(14,700) 4-3/4
(121) 13’ 10”
(4,210)
DHJ203 8
(203) 2-13/16
(71.4) 6-5/8REG 449,640
(2,000,000) 157,370
(700,000) 14,450
(19,600) 5-1/2
(140) 15’ 5”
(4,700)
Другие товары поставщика
|
|
Кронблок |
Венец рама изготовлена из высокопрочной стали формы.
Канавки шкивов упрочняются за счет индукции частоты средства для обеспечения длительного срок... |
|
|
Stabilizer |
Material: AISI 4145H, AISI 4145H Mod. Alloy Steel, AISI 4140-4142, AISI 4340, Non-mag material
Specification: OD: 6”-36”
We offer:
1. Stabilize... |
|
|
Line pipes |
Standard: According to API Spec 5L standard.
Use: Used as oxygen, water, and oil delivery pipe in oil and natural gas industry
Steel grade:
•PS... |
|
|
Casing accessories |
Casing Scraper
The Casing Scraper is used to clean out the dirt which may be left over internal wall of casing, such as cement scale, sandy soil, ... |
|
|
Casing & Tubing |
Casing & Tubing
Standard：
API SPEC 5CT Standard of American Petroleum Institute
Steel Grade:
J55, K55, N80, L80, N80-1, N80Q P110 etc．
Dia... |
Все товары поставщика
Похожие товары
