Combination Octane Rating Unit FTC-M with SXCP
The Advanced Solution ForOctane Testing
Standards:
-
Technical Parameters
-
Function Features and Benefits
-
Download
|
Basic Information |
|
|
Standard |
ASTM D2699 RON ASTM D2700 MON |
|
Working Range |
40-120 |
|
Operation Conditions |
|
|
Engine Speed (Motor) |
900±9 rpm |
|
Engine Speed (Research) |
600±6 rpm |
|
Ignition Timing (Motor) |
Variable as Cylinder Height (C.R.) is Changed |
|
Ignition Timing (Research) |
13° BTDC |
|
Intake Air Temperature (Motor) |
38°C±1°C |
|
Intake Air Temperature (Research)*1 |
52°C±1°C at Std. Barometer,Depends on Barometric Pressure |
|
Intake Mixture Temperature (Motor)*2 |
149°C±1°C |
|
Cylinder Jacket Coolant Temperature |
100°C±1.5°C |
|
Crankcase Oil Temperature |
57°C±8.5°C |
|
NOTE:*1 If IAT tuning is used to qualify the engine as fit-for-use, the temperature can be adjusted within ±22°C from the base temperature specified for the prevailing barometric pressure, and this temperature shall then be maintained within ±1°C when CR or KI results used for octane determination on each fuel are recorded. See ASTM D2699 for details. |
|
|
NOTE:*2 If intake MIXT tuning is used to qualify the engine as fit-for-use, the temperature can be adjusted between 141°C-163°C, and this temperature shall then be maintained within ±1°C when the CR or KI results used for octane determination on each fuel are recorded. See ASTM D2700 for details. |
|
|
Engine Information |
|
|
Compression Ratio (C.R.) |
4:1-18:1 |
|
Cylinder Bore (Diameter) |
82.55 mm (Standard) |
|
Stroke |
114.30 mm |
|
Carburetor Venturi (Research) |
14.30 mm |
|
Intake Valve Clearance (Hot) |
0.20 mm±0.025 mm |
|
Exhaust Valve Clearance (Hot) |
0.20 mm±0.025 mm |
|
Intake Valve Opens Timing |
10°±2.5° ATDC |
|
Intake Valve Closes Timing |
34° ABDC |
|
Exhaust Valve Opens Timing |
40° BBDC |
|
Exhaust Valve Closes Timing |
15°±2.5° ATDC |
|
Crankcase Oil Pressure |
172 kPa - 207 kPa |
|
Function Information |
|
|
Operating Panel |
SXCP Digital Control Panel |
|
Knock Meter |
Automated Digital Knock Meter |
|
Compression Ratio Adjustment |
Motor-Driven (Auto-Adjust) |
|
Compression Ratio Display Device |
Dial Indicator & Digital Counter |
|
Engine Speed Conversion |
Dual-Speed Motor |
|
Carburetor |
Four-Bowl Falling Level (with a cooling function) |
|
Ignition Timing Display |
Digital (Auto-Set) |
|
Crankcase Pressure Display |
Yes |
|
Electronic Barometer |
Yes |
|
Crankcase Oil Heater |
Yes |
|
Oil Temperature Display |
Yes |
|
Report Generation |
Yes |
|
Maintenance Log |
Yes |
|
Air Humidity Control Apparatus |
Yes |
|
Exhaust Surge Tank System |
Yes |
|
Unit Protection Systems |
Yes |
Send product request
Other supplier products
| Combination Octane Rating Unit FTC-M | The Complete Solution ForOctane Testing Combination (Research and Motor Method) Octane Rating Unit FTC-Mis used as a complet... | |
| Combination Octane Rating Unit FTC-M with SXCP | The Advanced Solution ForOctane Testing Combination (Research and Motor Method) Octane Rating Unit FTC-M2 With SXCP Digital Control Panelis ... | |
| Exhaust Surge Tank System | The Exhaust Surge Tank System includes a Flex Exhaust Manifold, a Surge Tank and cooling Water Drainpipe, those are connected with theoctane engi... | |
| OCTANE ENGINES | SINPAR Combination Octane Rating Unit provide the complete solutions for fuel, also referred to as the "engine knock test", measure gasoline charac... | |
| Research (RON) and Motor (MON) Test Method Conversion on Octane Engines FTC-M | Combination RON & MON Octane Rating Unit SINPAR FTC-M1/M2 provides the capability to switch between Research Method (ASTM D2699) and Motor Meth... |
Same products
| XD-MAX Winch for Drone | Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-MAX Winch for Drone The XD-MAX Winch for Droneis a high-performance aerial lifting solution d... | |
| XD-55 Winch for Drone | Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-55 Winch for Drone Introducing the XD-55 Winch for Drone—an advanced lifting system eng... | |
| XD-10 Winch for Drone | Seller: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-10 Winch for Drone SAFE, EFFICIENT AND CONVENIENT.Your reliable and intelligent air transport... | |
| Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Seller: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... | |
| Uratech Tool scoot cart for 50 taper tool holders | Seller: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |















