MDB Series Brake Unit
The MDB brake unitseries uses advanced power control technology to develop high-performance brake products in combination with a new generation of IGBT power devices.
The product can release the electric energy generated by the motor during the braking process through the power resistor (brake resistor) to generate sufficient braking torque to ensure the normal operation of the inverter and other equipment.
Features of MDB Series Brake Unit
The MDC series brakecontrolunitis used in the inverter to transfer the regenerative energy generated by the motor to the brake resistor for release. When a motor brakes, the regenerative energy generated during the braking phase will be fed back to the higher-level inverter device, which will cause the DC bus voltage of the device to rise, affecting the safety and normal operation of the device.
The MDC eletric brake unitis connected in parallel to the DC bus of the inverter. The bus voltage is limited to an acceptable level and the brake regenerative energy is transferred to the external braking resistor.
The braking resistor releases the brake energy in the form of thermal energy.
The power brake unitis connected directly to the frequency converter or inverter via the DC link terminals. When the DC bus voltage reaches a predetermined limit, the brake unit is automatically turned on to prevent the DC bus voltage from continuing to increase. The operation of the brake unit is independent of the frequency converter or inverter.
The brake unit electronics are powered by the DC bus voltage.
In order to increase the braking power, the brake units can be connected in parallel.
The MDC brake unit is available in 100A and 200A specifications. The product voltage rating covers both 220V and 380V voltage levels.
Send product request
Other supplier products
 |
Solar Pump Inverter | The solar pump inverter converts the DC power of the solar array into AC power, which can drive various pumps and provide clean water for remote ar... |
 |
KE300T Series Electro Hydraulic Servo Inverter | KE300T electro-hydraulic servo system is developed by MICNO based on intensive studying on the process flow of injection machine. It features high-... |
 |
Extension Card | MICNO supplies different types of expansion cardsto enhance the functions of a component of the system unit to provides extra features and faciliti... |
 |
Output AC Reactor | Smoothing circuit, efficient from IGBT motor drives, so as to extending service life of electric motors, reduce motor noise and eddy loss, reduce t... |
 |
High Voltage Inverter | MICNO high voltagepowerinverteradopts the most mainstream power unit series technology, with DSP+ARM+FPGA three-core processor as the control core.... |
Same products
 |
3 Axis Glue Dispensing System Robot clutch dispensing Machine for Glue Epoxy Adhesive potting | Seller: 824681 | AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic ep... |
 |
Automatic Glue Mixing and Potting Machine for LED driver | Seller: 824681 | AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic ep... |
 |
AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic epoxy resin potting machine 2 Part Silicone plyurethane epoxy dosing and dispenser potting machine | Seller: 824681 | AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic ep... |
 |
Double Liquid AB Adhesive Dispenser Equipment | Seller: 824681 | Double Liquid ABAdhesiveDispenserEquipment AB glue meter mix dispensing machine/automatic glue ... |
 |
AB glue meter mix dispensing machine/automatic glue potting machine for LED driver | Seller: 824681 | AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic ep... |
