MDB Series Brake Unit

• 

The MDB brake unitseries uses advanced power control technology to develop high-performance brake products in combination with a new generation of IGBT power devices.

The product can release the electric energy generated by the motor during the braking process through the power resistor (brake resistor) to generate sufficient braking torque to ensure the normal operation of the inverter and other equipment.

Features of MDB Series Brake Unit

The MDC series brakecontrolunitis used in the inverter to transfer the regenerative energy generated by the motor to the brake resistor for release. When a motor brakes, the regenerative energy generated during the braking phase will be fed back to the higher-level inverter device, which will cause the DC bus voltage of the device to rise, affecting the safety and normal operation of the device.

The MDC eletric brake unitis connected in parallel to the DC bus of the inverter. The bus voltage is limited to an acceptable level and the brake regenerative energy is transferred to the external braking resistor.

The braking resistor releases the brake energy in the form of thermal energy.

The power brake unitis connected directly to the frequency converter or inverter via the DC link terminals. When the DC bus voltage reaches a predetermined limit, the brake unit is automatically turned on to prevent the DC bus voltage from continuing to increase. The operation of the brake unit is independent of the frequency converter or inverter.

The brake unit electronics are powered by the DC bus voltage.

In order to increase the braking power, the brake units can be connected in parallel.

The MDC brake unit is available in 100A and 200A specifications. The product voltage rating covers both 220V and 380V voltage levels.

Другие товары поставщика

	Booster Module	In solar pump system, if the pump power is small, only a few solar panels are needed to drive the water pump. However, the voltage of several solar...
	Medium Voltage Soft Starter	Medium Voltage Starters The mv soft starteris suitable for the start-up of squirrel-cage asynchronous motors with voltage class 690V or 1140V. It ...
	Spare Parts	MICNO offers a large selection of industrial automation spare partsthat complete or complement our family of industrial control products. Using ou...
	Inverter Braking Resistor Unit	MICNO braking resistor unitis made of special vertical corrugated flat wire. The MICNOVFDbraking resistor is tightly combined and has good heat dis...
	Low Voltage Soft Starter	Suitable for the start-up of squirrel-cage asynchronous motors with voltage class 380V. Low voltage soft starteris widely used in electric power, m...

Похожие товары

	Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series	Продавец: Uratech USA Inc	TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m...
	Uratech Tool scoot cart for 50 taper tool holders	Продавец: Uratech USA Inc	Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so...
	3 in1 Decoiler Leveler Feeder	Продавец: Dongguan YouYi Precision Automation Equipment Co., Ltd.	3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f...
	NC Servo Feeder (0.1-3.0mm)	Продавец: Dongguan YouYi Precision Automation Equipment Co., Ltd.	NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of...
	Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage	Продавец: Uratech USA Inc	TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool...