Powder Separator Series

Application: The machine is used in all materials powder screening process of mining, metallurgical, building materials industries. Material: Granite, basalt, diabase, shale, quartz, pebble, limestone, iron ore, coal gangue, non-ferrous metal ore, pebbles, etc Technical Advantage: 1.The material in the hierarchical indoor, under the action of double rotor strong cyclone and radial shear force, and the material dispersion is good and the hierarchical higher above 85%. Sorting materials have been graded interface clearly powder area, each part of the selected powder conditional stability constant, the classifier of powder with high efficiency 2.Fineness regulation is convenient and reliable, and the adjusting range (0-4% cement; 8-12% raw material) is wider, can adjust the spindle speed and air agile control 3.It can make the open flow mill production add 40-60%, the classifier of powder’s efficiency can reach 85%. As to the existing cyclone classifier, it can be reformed under the main body structure and the motor load keep in the same situation, ensure that choose powder efficiency more than 85%, and 30% yield 4.In quite a throughput, compared with efficient vortex classifier, the efficiency is about the same, but our machine can reduce investment 20-30%, and cyclone and efficient than centrifugal classifier, it not only can reduce equipment specifications, and can improve the efficiency of 10-30% Operating principle: Out of the ground material is feed into the upper classifier inner shell, fall into one tray with rotor, under high speed rotation of materials plate, on the one hand the material splashing out because of centrifugal force, influenced by the material plate blade and produce ascending air current role, and lift up the material plate forming material boiling. Material is fine particles upward hike up and thicker or heavier material was fall into tray blade scattered along the simulated, complete the first choose powder. The cage rotor will be simulated the whereabouts of the scattered material again, make the fine powder raise up, back to the cycle of the wind, with the first selected material in the cage rotor grading ring, near the grading ring driving and grading ring together for high speed rotation, when the speed increase, the force also increases, the volume must be, cutting size will be smaller, the product fineness necked, if speed is reduced, the product fineness coarsening. Specification Model JX500 JX600 JX700 JX800 JX900 JX1000 JX1200 Capacity 20-30 30-40 40-70 70-90 90-100 100-120 120-150 Fineness Sand 0.5-4.75(mm) Mineral powder 40(µm) Main shaft rotate speed 190-380 150-350 150-320 120-300 120-300 120-280 120-280 Motor Model YCTL225-4A ACTL228-4B YCTL250-4A Y250M-6 Y280-6 Y135S-6 Y315M-6 Rotate speed 125-1250 225-1250 125-1250 980 980 990 990 Power 11 15 18.5 37 55 75 90 Transducer T9-45 T9-55 T9-90 T9-110 Blower Model 4-72.8C 4-92.10C 4-72N.12C 4-72N.14D 4-72N.16B 4-72N.16B 4-73N.18D Air quantity 29900 37850 62500 86311 99493 136430 165164 Air pressure 2494 2400 2390 2546 2456 2684 2771 Power 37 37 55 90 110 160 200 Transducer

Send product request

To: Shanghai Sunstone Heavy Machinery CO
Your E-mail:
Message text:

Send to other suppliers

Other supplier products

Belt Conveyor Series
Belt Conveyor Series Application: Metal and non-metallic mining, etc Material: It is suitable for crushing compressive strength which is not higher than 320 Mpa (Mpa)...
Disc Polluter
Disc Polluter Application fields:it can be widely used in gold mining, chemical plant, construction and foundry for uniformly continuous, quantitative material...
Spiral Chute
Spiral Chute roduct advantage: This equipment applies to the size 0.3--0.02 mm fine material such as iron ore, ilmenite, chromite, sulfurous iron ore, zircon...
Compound Cone Crusher
Compound Cone Crusher Application fields:Widely used in mining ore crushing, broken broken rocks with high hardness materials, building materials, cement, aggregates,...
Shaker Application fields:Mineral processing Materials:It is widely used in the tin,wolfram,gold,and silver, lead, zinc, tungsten, tantalum, niobium,ti...
All supplier products

Same products

VFD Spindle Motor High Speed CNC Router Spindle Attachment Seller: Jinan EagleTec CNC Machinery Co.,Ltd. VFD spindle motor has another name of high speed electric spindle. From the cooling mode, there a...
lug tire for the behind of the truck Seller: QINGDAO SUNSTAR RUBBER CO.,LTD lug tire used in the bihind of the truck
rib tire for the front of the truck Seller: QINGDAO SUNSTAR RUBBER CO.,LTD rib tire used in the front of the truck
wheel rim outer edge of a wheel for holding the tire Seller: QINGDAO SUNSTAR RUBBER CO.,LTD wheel rim outer edge of a wheel,holding the tire
Pneumatic,solid forklift tires for forklift machines Seller: QINGDAO SUNSTAR RUBBER CO.,LTD solid forklift tires used in forklift