AC Series Resonant Test System

AC Series Resonant Test System

Applications

Resonant Test Systems is appliedfor the generation ofa continuously variable alternating (AC) voltage of a fixed

frequency (mainly 50 or 60 Hz) for high-voltage (HV)routine, type and development testing of capacitive test

solution of frequency-tuned resonant test systems.

Capacitive test objects are cables, capacitors, gasinsulated switchgear (GIS), but also large rotating

machines, instrument and power transformers (for appliedvoltage tests). Resonant test systems enable not only

HVAC tests at 50/60 Hz, but also at higher or lowerfrequency (10-300 HZ) and dynamic tests with fast

voltage changes (e. g. for capacitors). Because of theirprecise sine-wave, resonant test systems are very well

suited for the combinations of HVAC withstand tests withpartial discharge (PD) measurement.POWERadapts the

resonant test systems to the requirements of the relevantstandards and the demand of the customer.

The main advantageof resonant test systems is the lowpower demand, because only the losses in the test circuit

must be replaced from the power supply. The qualityfactor Q which is the relation between the test power S

and the loss power P ranges between Q = 10 and valuesup to 100, this means only 10 to 1 % of the test power

must be supplied. A resonant test system is remarkablylighter, cheaper and more economic than an AC

transformer test system and should be applied if the testobjects are capacitive. In case of a disruptive discharge

the test object is not destroyed, because the systemsgoes out of resonance. POWER resonant test systems

are characterized by a very modern system configurationand have proven highest reliability.

Tunable inductance reactor modules for series resonantcircuits are available between 250 and 1200 kV and test

power between 1000 and 20000 kVA

Tunable frequency modules for series resonant circuitsare available between 100 and 1600 kV and test power

between 50 and 9000kVA.(Typical Frequency adjustmentbetween 20-300 Hz)

Additional features and accessories:

Resonant circuits with variable frequency

low voltage power filter

Partial discharge (PD) measuring system including blocking impedance)

Compressed gas capacitor

Capacitance and dissipation factor measuring instrument

Moveable design

Made solution upon customer's request

CNME produces several lines of power frequency output HV AC Dielectric Test sets, Transformer Routine Test, HV DC Dielectric Test, etc. These testers perform AC withstand testing to verify the AC voltage integrity of insulation. We can also supply Gas Insulated AC Testing System and High Voltage Impulse Generator, if you want Electrical Equipment Test , you can call us at any time.

Other supplier products

	Porcelain Insulator	Porcelain Insulator Porcelain insulators manufactured are wet process porcelain, and used in distribution and transmission line. Porcelain line pos...
	Oil immersed Current transformer	Oil immersed Current transformer main parameter of 69kv CT Rated current ratio: 2000/1600/1500/1200/1100/800/500/400/300 : 5 A Rated output capaci...
	Tansformer Insulation Testing Station design	Tansformer Insulation Testing Station design We will be willing to provide whole-process engineering consulting servicesfor you: Preparingfeasibili...
	SF6 reference Capacitor - 400kV 50pF compressed gas standard capacitor	Genneal Information: Compressed air standard capacitor is a necessary instrument in every HV test lab. It is used to measure the capacitance of cap...
	Single phase 6 position test system for energy meter calibration	Single phase 6 position test system for energy meter calibration single phase energy auto-calibration system is a new generation, high precision e...

All supplier products

Same products

	Air insulated Dry type transformer VPI	Seller: TAILI ELECTRIC CO.,LTD.	Air insulated Dry type transformer VPI TAILI SG(B) air-barrier dry-type transformer( VPI) is des...
	Cast Resin Dry Type Transformer with Cooling Fan	Seller: TAILI ELECTRIC CO.,LTD.	Cast Resin Dry Type Transformer with Cooling Fan Taili’s advanced epoxy resin casting proc...
	1250kVA Dry type Transformer for Bangladesh	Seller: TAILI ELECTRIC CO.,LTD.	1250kVA Dry type Transformer for Bangladesh Taili's advanced epoxy resin casting process ensures...
	35kV Dry-type transformer with OLTC	Seller: TAILI ELECTRIC CO.,LTD.	35kV Dry-type transformer with OLTC Taili's35kV Dry-type Transformer with OLTC (On-Load Tap Chan...
	Cast Resin Dry Type Transformer	Seller: TAILI ELECTRIC CO.,LTD.	Cast Resin Dry Type Transformer IEC/ANSICast Resin TransformersfromTAILI Electric, is difference...