Kaneko 4-way solenoid valve (SINGLE) -M15G SERIES
Feature
Internal sliding parts extremely slippery by the hard-anodized, stick-slip has excellent abrasion resistance in operation can not operate even without lubrication.
The main parts are made of aluminum alloy, has become very small and light.
You can be easily replaced AC, DC coil is designed so that both fit into the same casing.
Corrosion treatment has been applied in a very strong hard anodized corrosion resistant.
Flameproof is a test of the Ministry of acceptable product.
Main valve is not malfunction due to spring for actuation by a piston, without the need for a spring, also be left for a long period of time and therefore will operate off balance spool type.
With buttons for manual, you can check or test operation.
Minimum operating pressure is 0.1MPa operate reliably in because there is no Earosu.
You can also be used as a three-way valve to select the port in the form of port 5.
Standard specification
FLUID
CLEAN AIR
FLUID TEMPERATURE
-20 ～ 60℃
AMBIENT TEMPERATURE
-20 ～ 60℃
DUTY CYCLE
100% CONTINUOUSLY RATED
OPERATING VOLTAGE RANGE
+10，-15％
WORKING PRESSURE
0.1 ～ 0.99MPa
Cv. FLOW FACTOR
0.87
STANDARD VOLTAGE
See below
STANDARD VOLTAGE
|
AC |
DC |
|||
|
V/Hz |
INRUSH A |
HOLDING A |
V |
A |
|
100/50 |
0.27 |
0.16 |
24 |
0.33 |
|
100/60 |
0.25 |
0.13 |
48 |
0.15 |
|
110/60 |
0.25 |
0.15 |
100 |
0.072 |
|
200/50 |
0.14 |
0.08 |
110 |
0.08 |
|
200/60 |
0.13 |
0.07 |
125 |
0.06 |
|
220/60 |
0.13 |
0.08 |
||
Product Image
M15G GENERAL PURPOSE TYPE
|
M15G-8～10 GENERAL PURPOSE TYPE |
||
|
NOMINAL DIAMETER |
MOUNTING LENGTH |
H |
|
8 |
60 |
123 |
|
10 |
60 |
123 |
M15G EXPLOSION-PROOF TYPE
|
M15G-8～10 EXPLOSION-PROOF TYPE |
||
|
NOMINAL DIAMETER |
MOUNTING LENGTH |
H |
|
8 |
60 |
138 |
|
10 |
60 |
138 |
M15G HYDROGEN EXPLOSION-PROOF TYPE
|
M15G-8～10 HYDROGEN EXPLOSION-PROOF TYPE |
||
|
NOMINAL DIAMETER |
MOUNTING LENGTH |
H |
|
8 |
60 |
156 |
|
10 |
60 |
156 |
M15G DUST EXPLOSION-PROOF TYPE
|
M15G-8～10 DUST EXPLOSION-PROOF TYPE |
||
|
NOMINAL DIAMETER |
MOUNTING LENGTH |
H |
|
8 |
60 |
190 |
|
10 |
60 |
190 |
DESCRIPTION OF OPERATION
Send product request
Other supplier products
 |
Kaneko 2-way solenoid valve - M20 series | Product description A solenoid valve Ni-po, in one place each valve, inlet and outlet piping i... |
|
|
Kaneko 4-way solenoid valve (SINGLE) -M15G SERIES | Feature Internal sliding parts extremely slippery by the hard-anodized, stick-slip has excellent abras... |
 |
EIM Electric Actuator M2CP | EIM HQ Series Electric ActuatorEIM Multiport Actuator - MPA EIM TEC2000 Actuator Part-Turn Manual Gear OperatorW020-B WO40-B WO42-A WO51-A WO52-A W... |
 |
Honeywell SmartLine ST 700 Differential Pressure Transmitters | SmartLine ST 700 Differential Pressure Transmitters (STD700) bring smart technology to a wide spectrum of measurement applications ranging from fur... |
 |
testo 160 THL - WiFi data logger with integrated sensors for temperature, humidity, lux and UV radiation | Product Description The testo160 THL belongs to the testo160 data logger range, which was developed especially for t... |
Same products
 |
Low-E Braided Packing, Flexible Graphite, Fiberglass, Custom | Seller: Magpie Valve Packing Gasket Co., Ltd | The Low Emission Braided Packing Manufacturer delivers high-performance flexible graphite valve p... |
 |
fused AZS block | Seller: Sino-Inner Mongolia Easun Refractory Co.,Ltd | Weir block AZS-33 is characterized by its excellent corrosion resistance against molten glass du... |
 |
fused AZS block | Seller: Sino-Inner Mongolia Easun Refractory Co.,Ltd | Channel block AZS-33 is characterized by its excellent corrosion resistance against molten glass... |
 |
fused AZS block | Seller: Sino-Inner Mongolia Easun Refractory Co.,Ltd | Peep hold block AZS-33 is characterized by its excellent corrosion resistance against molten gla... |
 |
fused AZS block | Seller: Sino-Inner Mongolia Easun Refractory Co.,Ltd | AZS-33 AZS-33 is characterized by its excellent corrosion resistance against molten glass due to... |
