High-efficiency Concentrator

Product Advantage:
1, Add flocculant increased size of solid particles settlement, thus speeding up the settling velocity
2, Install tilt plates reduce particles deposition distance, increase the settlement area
3, Play mud deposited thick layers-flocculation, filtration, compression, and increase the amount.
4, Equipped with a complete automatic control facilities.

Working principle:
Thickener from the main circular thickener and rake scraper machine composed of two parts. Concentrated solid particles suspended in the pulp in the pool settlement under the action of gravity, the upper part is clarified water, solid-liquid separation. Deposited in concentrated sludge at the bottom of the pool by a rake scraper scrapers to the bottom center continuously discharge port, along the overflow on the clarified water from concentrating pool.

Application field:Non-ferrous metal ore pulp

Model Concentration pond
(m)
Deposit
(m2)
Harrow part Motor Capacity
(t/h)
Weight(t)
Model Specification Inner diameter Depth Pond degree Method Height
(m)
Rotation time
(min/r)
Driving Lifting    
NZS-1 Φ1.8m 1.8 1.8 2.54 Manual  0.16 2 Y90L-6 1.1KW -- 5.6 1.235
NZS-3 Φ3.6m 3.6 1.8 10.2 Manual  0.35 2.5 Y90L-6 1.1KW -- 22.4 3.064
NZS-6 Φ6m 6 3 28.3 Manual  0.2 3.7 Y90S-4 1.1KW -- 62 8.751
NZSF-6 Φ6m 6 3 28.3 Manual  -- 3.7 Y90S-4 1.1KW -- 62 3.649
NZ-9 Φ9m 9 3 63.6 Auto  0.25 4.34 Y132S-6 3KW XWD0.8-3 0.8KW 140 6.134
NZS-9 Φ9m 9 3 63.6 Manual  0.25 4.34 Y132S-6 3KW -- 140 5.146
NZS-12 Φ12m 12 3.5 113 Manual  0.25 5.28 Y132S-6 3KW -- 250 8.51
NZ-15 Φ15m 15 4.4 176 Manual  0.4 10.4 JTC752A-44 5.2KW Y112M-6 2.2KW 350 21.757
NZ-20 Φ20m 20 4.4 314 Auto  0.4 10.4 JTC752A-44 5.2KW Y112M-6 2.2KW 960 24.504
NZ-30 Φ30m 30 7.165 707 -- 0.61 13.7 Y100L1-4 4.4KW YCJ132-S 1.5KW -- 31.8
NZS-45 Φ4.5m 45 4.636 1590 Manual  -- 20 JTC672A-445.2KW YCJ160-S 2.2KW 515 47.81
NT-15 Φ15m 15 3.5 177 -- -- 8.4 Y123M2-65.5KW -- 390 11
NQ-18 Φ18m 18 3.5 255 -- -- 10 Y123M2-65.5KW -- 560 10
NQ-24 Φ24m 24 3.4 452 -- -- 12.7 Y160M-6 7.5KW -- 1000 `23.3
NG-30 Φ30m 30 3.6 707 -- -- 16 Y160M-6 7.5KW -- 1570 26.42
NJ-38 Φ38m 38 4.9 1134 -- -- 10.25 JZT252-4 11KW Y160M-6 7.5KW 1600 55.26
NT-45 Φ45m 45 5.05 1590 Auto  -- 19.3 Y160l-6 11kw -- 2400 58.64
NTJ-53 Φ53m 53 5.07 2202 -- -- 23.18 Y180L-6-15KW -- 6250 79.80
NT-100 Φ100m 100 5.65 7846 -- -- 43 Y180L-6 15KW -- 3030 199.648



Send product request

To: Shanghai Sunstone Heavy Machinery CO., Ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

High Weir Spiral Classifier
High Weir Spiral Classifier Product Advantage:The classifier widely used in mineral processing plants and closed circulation mill dubbed way split split sand mine, or used in ...
Chute Feeder
Chute Feeder Product advantages:Trough feeder used in mineral processing, coal, chemical industry and other industrial sectors, granular and powder storage silo...
Vibrating Feeder
Vibrating Feeder 1.High efficiency and low operation cost Adopts double eccentric shaft as excitation source, amplitude stable, making sure the vibration ore m...
Raymond Mill
Raymond Mill Brief introduction:(Raymond machine) is a new kind of milling equipment of highly efficient closed loop instead of ball mill,which is applied to sm...
Tailing Recycling Machine
Tailing Recycling Machine Product advantage:1, Arrangement of magnetic field: magnetic pole spacing of disks is small, no magnetic field-free region between the disk and the...
All supplier products

Same products

Polyester forming fabrics
Polyester forming fabrics Seller: HEBEI QIANGHUA MESH INDUSTRY CO.,LTD 4-shed single layer Polyester forming fabric is a standard type of polyester forming fabric in pa...
mgo board production line Seller: Shandong Chuangxin Building Materials Machinery Co.,Ltd. Dear Sir   This is Huina Liu from Shandong Chuangxin Building Materials Machinery Co.Ltd.&nb...
mgo board production line
mgo board production line Seller: Shandong Chuangxin Building Materials Machinery Co.,Ltd. Dear Sir   This is Huina Liu from Shandong Chuangxin Building Materials Machinery Co.Ltd.&nb...
Hobby Stone Carving Machine Small CNC Router for Marble Carving S6090C
Hobby Stone Carving Machine Small CNC Router for Marble Carving S6090C Seller: SUZHOU RICO MACHINERY CO., LTD From:www.ricocnc.com E-mail: rico@ricocnc.com Homemade Small CNC Stone Router Cutting Etch...
Granite Table Carving Machine Stone Work CNC Router S1532C
Granite Table Carving Machine Stone Work CNC Router S1532C Seller: SUZHOU RICO MACHINERY CO., LTD From:www.ricocnc.com E-mail: rico@ricocnc.com Stonework CNC Router for Marble Granite Coun...