Enameled Wire Stripping Machine
Installation and use of .
Choose appropriate peeling wheel and install them on the machine. Put two enameled wire in the middle of the peeling wheels, set up two peeling wheels to clamp the enameled wire and gently hold the coil part with your hand then press the switch. To test the stripping effect, you can adjust the pressure between the two peeling wheels and control to achieve the ideal effect. When you start, put the enameled wire between two peeling wheels then pull out the wire easily from the wheels. So the peeling work is completed. For when the machine works, high-speed peeling wheels will rub against the insulation and the oxides of the enameled wire. After being peeled, the surface is shiny clean. When the surface of the nylon fiber peeling wheel is uneven or bump, it can cause disconnection or dirty peeling wheel. Fixing is required under this circumstances. You can use a cloth to smooth the wheel until the two strip wheel can smoothly contact. Regularly trim the peeling wheel and this will increase the life of the peeling wheel. When you need to replace the wheel, you can start the work again as long as you remove the wheel that you can no longer use, and then insert the new paint wheel. When we install wire stripping wheel, it should be noted that the wire wheel has direction.
Safety technical operation procedures.
Send product request
Other supplier products
 |
Label Cutting Machine With Cold & Hot Cutting BJ-07N | Description of With Cold & Hot Cutting BJ-07N Model: BJ-07N with Memory Knife: Hot & Cold cutting CUT LENGTH (mm): 1-99999mm MAX CUT WI... |
 |
AL-936 Label Rewinder | Features ofAL-936 Label Rewinder Automatic speed sync and tension control, without any adjustments. Wind inside or outside, Large roll capacity... |
 |
Automatic Label Rewinder | Automatic Label Rewinder AL-938 Label Rewinder Machine * Available Width: 20 ~ 150mm* Speed: 200mm/sec* Max. OD of Roll: 230mm* ID of R... |
 |
Enameled Wire Stripping Machine | Installation and use of enameled wire stripping machine. Choose appropriate peeling wheel and install them on the machine. Put two enameled wire i... |
 |
BJ-506 Wire Cable Bundler Machine | Specification ofBJ-506 Wire Cable Bundler Machine Model: BJ-506 Available bind wire Length: 220mm—350mm Available binding wire diamete... |
Same products
 |
Impact crusher Large high-resistant plate hammer crushing equipment Mobile impact crushing sand making machine | Seller: Advanced Machinery Manufacture Co., Limited | 1. Simple structure and stable operation. 2. Bearings, water, and materials are divided into lite... |
 |
Cassava Vibrating Sieve | Seller: Nanyang Goodway Machinery & Equipment Co., Ltd. | Features of Cassava Vibrating Sieve Break the pressed cassava cakes into granules and separate t... |
 |
Cassava Stone Cleaning Machine | Seller: Nanyang Goodway Machinery & Equipment Co., Ltd. | Features of Cassava Stone Cleaning Machine Used to remove the stones in the material such as rig... |
 |
Garri Processing Machinery | Seller: Nanyang Goodway Machinery & Equipment Co., Ltd. | Cassava Garri(Gari) Process Description and Flowchart: Garri is a fermented and gelatinized dry ... |
 |
Garri Fryer(Cassava Garri Fryer) | Seller: Nanyang Goodway Machinery & Equipment Co., Ltd. | Features of Garri Fryer(Cassava Garri Fryer) Roasting be done mechanically using an automated ga... |
