FDT-0131 Automatic opening flash point tester

Scope

Automatic opening flash point tester is based on ASTM D92, GB / T3536 standard "of petroleum products of flash and fire assay (Cleveland open cup method)" provides design and manufacture. Using liquid crystal screen full English human-machine interface, automatic movements, menu-guided input, advanced technology, simple operation, high technology, it is the ideal alternative products imported products.

Features

1, large-screen LCD, with full English operating software prompts;

2, with a test date, test time and other parameters are prompted;

3, automatically correct atmospheric pressure and calculate the correction value;

4, innovative introduction of imported XECOM US data processing chip, fast and accurate data processing;

5, automatic heating, automatic sweeping fire, automatic discrimination results automatically print the results;

6, automatically cut off the end of the experiment originated, to protect the safety of the laboratory;

7, circuit safety measures adopted Friend designed to avoid affecting current or voltage changes caused by the instrument;

Technical Parameters

1 Power supply: AC 220V ± 10%, 50Hz

2, range: room temperature ~ 400 ℃;

  1. ≤4 ℃

4, reproducibility: ≤6 ℃

5, the resolution of: 0.1 ℃

6, heating rate: in line with standard;

7, Ignition: electronic ignition, gas flame.

8, to adapt to the ambient temperature: 10-40 ℃

9, to adapt to the environment humidity: <85%

  1. Total power consumption: less than 400W



Send product request

To: Changsha Friend Experimental Analysis Instrument Co., Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

FDT-0231 Automatic Closed Cup flash point tester
FDT-0231 Automatic Closed Cup flash point tester Scope Automatic Closed flash point tester according to ASTM D93, GB / T261 standard "Determination of flash point of petroleum products (closed cup...
Automatic volume resistivity tester
Automatic volume resistivity tester Scope Automatic volume resistivity tester is based People's Republic of China Electric Power Industry Standard DL / T421-2009 requirements of desig...
Automatic surface tensiometer
Automatic surface tensiometer Scope Surface tensiometer according to national standard GB / T6541 provisions of design and manufacture. Automatic interfacial tension meter ring ...
Insulating oil dielectric strength tester transformer oil breakdown voltage tester
Insulating oil dielectric strength tester transformer oil breakdown voltage tester Scope This equipment according to GB/ T507 and industry standards DL429.9 national standard GB designed and manufactured, using a special software ...
FDT-0311 Pour point / cold filter plugging point of petroleum products tester
FDT-0311 Pour point / cold filter plugging point of petroleum products tester Scope Pour point / cold filter plugging point of petroleum products tester is in accordance with GB / T510 "Determination of the pour point of petr...
All supplier products

Same products

Riveting and Welding Cast Iron Surface Plate
Riveting and Welding Cast Iron Surface Plate Seller: Botou Jianxin Casting Tools Co.,Ltd Cast Iron Surface Plate Material: HT200-300 Standard: GB/T22095-2008 Specification: 750x1000-3000...
 Cast Iron Fitter Workbench
Cast Iron Fitter Workbench Seller: Botou Jianxin Casting Tools Co.,Ltd Cast Iron Surface Plate Material: HT200-300 Standard: GB/T22095-2008 Specification: 750x1000-3000...
Round Cast Iron Surface Plate
Round Cast Iron Surface Plate Seller: Botou Jianxin Casting Tools Co.,Ltd Cast Iron Surface Plate Material: HT200-300 Standard: GB/T22095-2008 Specification: Φ300--&Ph...
Cast Iron Floor Plate
Cast Iron Floor Plate Seller: Botou Jianxin Casting Tools Co.,Ltd Cast Iron Surface Plate Material: HT200-300 Standard: GB/T22095-2008 Specification: 750x1000-3000...
Cast Iron Bed Plate
Cast Iron Bed Plate Seller: Botou Jianxin Casting Tools Co.,Ltd Cast Iron Surface Plate Material: HT200-300 Standard: GB/T22095-2008 Specification: 200x200-3000x...