Hexapod Tumbler test instrument

• 

Introduction

Hexapod tumbler tester, also known as carpet appearance assessment tester, is designed to determine the appearance maintenance ability of carpet. The tester is equipped with a cylinder and an improved hexapod drum cover. The tumbler is mounted on the free floor standing device, vibrated by electricity. Ribbed rolling device mounted in the center is driven by variable speed motor to spray soil. The hopper and rolling device is mounted inside of the hexapod drum. The soil is directly sprayed on the carpet specimen installed inside of the drum via the hopper. The cylinder, 2.3kg, 205mm length x 63mm width, runs freely on the carpet specimen inside the drum. The improved hexapod drum cover makes it possible that the device can be used together with the existing hexapod device.

Working principle

·Use double sided tape to stick the carpet specimen on the elastic lining, and then fix them inside of the tumbler, which can be retrieved anytime. If in need, add bottom lining under the carpet.

·Tumbler adopts a reciprocating motion mechanism, in order to provide more real pile condition. The required number of revolution can be set in advance by a rotating counter. The 3.8 Kg tumbler has six polyurethane footholds (if there is damage to the six footholds, serious wear or service for two years, make replacement).

·2000 revolutions of the specimen takes about an hour. Take out the carpet for cleaning by vacuum cleaner as that in actual scenario. Change a new specimen for repetitive test, usually 6 tests and in total of 12000 revolutions.

Features

·Built-in cylinder

·Improved hexapod drum cover

·Good stability

·Quick test.

Technical Parameter

Dimension:430×780 ×400 mm(W×D×H)

Power:375 W

Consumables

H polyurethane feet

Cylinder liner

Appearance change evaluation:

ISO 9405:2001 specifies the following two evaluation methods:

Other supplier products

	Sweating Guarded Hotplate/ Thermal Insulation and Moisture Permeability Tester / Fabric Thermal Resistance Tester	Testing Standards:GB/T 11048, ISO 11092, ASTM F1868, ASTM D1518, JIS L1096 Application The Thermal resistance wet resistance tester simulates t...
	Electrochemical Corrosion and Wear Testing Machine	Introduction to Main Purposes 1. Evaluation of Material Corrosion and Wear Performance: By simulating the corrosion and friction - wear environmen...
	Fabric Surface Combustion Performance Tester ISO 10047:1993 GB/T 8745-2001	Standards: For different standards, different accessories are required . GB/T 8745-2001 Textile. Combustion performance. Determination of surface ...
	Anti Synthetic blood penetration tester	Standards: GB 19083-2010 Technical requirements of medical face masks - Anti-penetration property of 5.5 synthetic blood. YY/T 0691-2008 Clothin...
	Footwear Flexing Tester	Product Introduction: The finished shoe resistance zigzag tester drives the zigzag part of the finished shoe to zigzag repeatedly with the zigzag ...

Same products

	Special measuring instrument for rebar profile GDC-L360-JX	Seller: Eastloong Measurement & Control  Technology Co.,Ltd.	The special measuring instrument for rebar profileis used to precisely measure the shape and dime...
	Diameter measuring equipment	Seller: Eastloong Measurement & Control  Technology Co.,Ltd.	Diameter measuring equipment Diameter measuring equipment is used to accurately determine the di...
	Hot rolled bar outer diameter measuring instrument GDC-J2400-JX	Seller: Eastloong Measurement & Control  Technology Co.,Ltd.	Purpose:Real-time online inspection of geometric dimensions of high-speed wire rods, square steel...
	UV Detector	Seller: Xinsheng Pharmaceutical Instrument Co., Ltd	The ultraviolet-visible dual-wavelength detector features high sensitivity and a wide linear rang...
	Fabric ici pilling and snagging box	Seller: Standard International Group (HK) Limited	Fabric ici pilling and snagging boxis composed of the same speed motor drive, and to maintain the...