card making equipment
laminatorHT-C-2
The HT-C-2 is used for making PVC card, during the card making procedure, it can laminate the material of making card needed one time. You can add pressure directly through the handwheel,the temperature is controlled by the digital apparatus, which automatically carries on all the processes of heating, keeping a stable temperature , cooling. When the procedure is over, it will sound out a warning.The laminator is coolled by both air and water. It has stable preformence,simple operation, fine-looking apperance, accord with the occidental’s concept.Now it can laminate Non-contact IC&ID cards,it suits for medium or diminium factory to make cards. Technical Specification:
Type HT-C-2Lamination area 210m*297mm(A4) 100mm*120mm(A6)Laminated layers 1~10sheet Control mode digital intelligent apparatus control Room temperature 0~150 degree centigradePressing method with handle wheelCooling method water cooling&air coolingPower AC220/110V AC 50/60HzWork Speed 650pcs /hourMachine size 620mm*580mm*420mmN. W. 107kgWooden box packing 750mcm*780mm*510mmG. W. 129kg
Power Consumption:2.5-3.5 kwh electricity each hour
1 Flow time:8-10minutes(layers decides time)
Other supplier products
|
card making equipment |
laminatorHT-C-2
The HT-C-2 is used for making PVC card, during the card making procedure, it can laminate the material of making card needed one ... |
All supplier products
Same products