Low Temperature-resistance TPO
The modification of ATP for polyolefin elastomers mainly reflects the following technical characteristics:
In the application of cable insulant, the modification TPO of ATP can not only meet the requirement of electric performance from the insulant but also display a more broad temperature resistant character——displaying excellent mechanical properties and aging properties at the test temperature of -50℃—+125℃. So, this is the optimized insulant for wires and cables which have special requirements for low-temperature resistance.
The jacket made up of TPO wire and cable insulant from ATP keeps its section surface smooth and orderly with little retraction rate after immersing in solder machine （350℃/2”）. In the application of high-temperature-resistant cables (temperature≤125℃) such as charging vehicle cables (EV Cable), equipment connection cables, etc., the jacket made up of TPO wire and cable insulant from ATP takes the place of XLPE materials to meet the requirements of insulant high-temperature aging and shrinkage for nominal cables. And this can simplify the processing procedures by a large margin and improve the processing efficiency and yield.
Application: TPO has the characteristics of small specific gravity, good impact strength, and low-temperature brittleness, and is suitable for applications in the cable industry.
Technical Data of Low Temperature-resistance TPO
|
Technical Data Sheet |
Model |
||||
|
Material Properties |
Test Standard |
Test Condition |
Unit |
2895F-ESS-1008S |
|
|
General Characteristics |
Material Category |
- |
- |
- |
|
|
Appearance(Light/Semi-matte/Frosted) |
- |
- |
- |
||
|
Extrusion/Injection |
- |
- |
- |
||
|
Physical Characteristics |
Hardness |
ISO 48 |
15S |
Shore A |
97 |
|
Proportion |
ISO 1183 |
- |
g/cm³ |
||
|
Melt Index |
ISO 1133-1:2011 |
190℃/2.16kg |
g/10min |
||
|
Brittle Temperature |
ISO 812 |
- |
℃ |
||
|
Mechanical Properties |
Elongation |
ISO37:2017 |
200mm/min |
% |
590 |
|
Tensile Strength |
ISO37:2017 |
200mm/min |
Mpa |
||
|
Tearing Strength |
ISO34-1:2015 |
500mm/min |
KN/m |
||
|
Hot Air Aging |
Elongation Retention Rate |
ISO37:2017 |
- |
% |
|
|
Tensile Strength Retention Rate |
ISO37:2017 |
- |
% |
||
|
Electrical Performance |
Volume Resistivity |
ASTM D257 |
- |
Ohm-cm |
|
|
Permittivity |
ASTM D150 |
- |
- |
||
|
Combustion Performance |
Vertical Burning Test |
UL 94 |
- |
||
|
Oxygen Index |
ASTM D2863 |
- |
% |
||
|
Feature |
|||||
As one of the most professional polymer compounding companies, we provide polymer compound, tpo polyolefin, polymer thermoplastic, tpe elastomero termoplastico and etc. For more information, please feel free to contact us!
Send product request
Other supplier products
|
|
Low Temperature-resistance TPO | The modification of ATP for polyolefin elastomers mainly reflects the following technical characteristics: In the application of cable insulan... |
 |
Flame Retardant TPU | ATP's modified TPEs product series (Compounded/Modified TPEs) is a matrix resin with SEBS/SEPS as the core. According to different application requ... |
 |
High Elasticity /Flexible TPEs | E Series High Elasticity TPEs Applied Fields: High-end market TPEs wire & cable products with excellent comprehensive performances especiall... |
 |
Extruding/Under Extruding TPEs | Extrusion-grade TPE Products Characterization: Smooth & matt surface, excellent hand-feeling. Good tensile strength and elasticity. Halog... |
 |
ATP For High Flame Retardant Cables | ATP is able to quickly provide customers with High Flame Retardant cables material solutions that fully comply with the major building directives, ... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
