Transparent Fast Cure Silicone Rubber for Vacuum Bag Ship Shell mold
Transparent Fast Cure Silicone Rubber for Vacuum Bag Ship Shell mold
Description
Two-component silicone,platinum-curing/ addition-cure type, flowable, vulcanizes at room temperatureor heated temperature.
Can be used for a long time in the temperature range of - 65 ° C - 200 ° C and keep its soft and elastic properties.
Application
- Suitable for molding variety of products in large quantity, such us art crafts, furniture, architectural elements, garden ornaments, shoe, tire, soap, candle, vacuum bagging, wind turbine blades, ship/boat hulls, aircraft hulls, FRP pipes/profiles, beacon lighthouse covers, military industry, aviation and other fields etc.
- Suitable for materials such as resin, PU, PVC, polyester, gypsum/plaster, wax etc.
Features& Advantages
²Food grade, FDA
²Low shrinkage
²Low viscosity
²Anti-deformation
²High temperature resistance
²Not oily
²No bubbles
²Excellent flow levelingwhich will copy finest details and patterns from exquisite products.
²Durable with excellent tear and tensile strength, guarantee molding times
²Easily demolding
²Resist aging, acid,alkali,corrosionand weather aging
Typical propertiesINI-E620
|
PropertiesIndex |
Test Report |
|
|
Before Curing |
Appearance |
Translucentfluid |
|
Viscosity（cps） |
3800±1000 (Adjustable) |
|
|
Operating |
Mixing Ratio （By weight） |
1：1 |
|
Operating Time（25℃/min） |
10～15 (Adjustable) |
|
|
Curing time（hr,basically cured） |
0.5 (Adjustable) |
|
|
Curing time（hr, perfectly cured） |
12 |
|
|
After Curing |
Hardness (shore A) |
20±2 |
|
Tear strength (kN/m) |
25±4 |
|
|
Tensile strength (Mpa) |
6.5±1 |
|
|
Shrinkage (%) |
≤0.1 |
|
|
Elongation (%) |
410~560 |
|
|
Density (g/cm) |
1.02 |
|
Operation instructions
1.Mix part A and pars B evenly with 1:1 mixing ratio.
Notes: 1) Weigh the two parts exactly by electronic weight. For example, the operation time will be shorten after adding too much catalyst.
2)Mix part A and part B evenly. Otherwise the silicon rubber will be partly solidified which will make the finished molds meet a short life and waste silicon rubber.
2.Vacuum pumping
Notes: 1) This step is not have to have, but it is best if there is one. It will discharge all air in the mixture successfully, so as to ensure that therewill be no bubbles in the finished mold.
2) This step is less than 10 minutes. Otherwise, itWill cause cross-linking reaction, and no morefurther steps will be available.
- Pouring casting
Notes: We suggest to set the mold for another 12 hours after demould before put it into large production.
Package
5KG, 20KG, 25KG and 200KG per drum.
(There are metal drum and plastic drum for your choice for 5KG and 20KG)
Shelf life
Twelve(12) months when stored under dry and cool place by original package under 25℃.
WhyChooseus
1.Powerfulfactorywithaproductioncapacityof8000perday, we are the more than 10 years factory in China, with excellent and stable quality.
2.High-endresearchanddevelopment(freesample)
BeingaleadingliquidsiliconemanufacturerinChina,wehaveaprofessionalR&DteamandQCteam(12experts)andourproductisRoHS,MSDS,ISO,REACH,ULapproved,sothereisnoneedtoworryaboutthequality.
3,Efficientservice
Wecanprovidefreetrainingofsiliconetechniqueandfreesiliconesamples.wehaveaprofessionalsalesteamwhowillsolveyourproblemspatiently.Besides,withefficientlogisticsdistributionsystem,youcouldgetyougoodsearlier.Last,goodaftersalesservice,webuildlongtermcooperationrelationship,oncethereisqualityproblem,wecouldsolverightaway.Moreimportantly,returnandexchangeareacceptedwhilequalityproblemsoccurred.
We can provide the free sample, more details about silicone rubber, pls contact Ms Lisa at:
Mobile/ Whatsapp/: +86 188 1670 2967
2967or A108059
E-mail:lisasilicone(at)
Twitter/Facebook:lisasilicone
Send product request
Other supplier products
 |
rtv2 platinum based silicone rubber chocolate candle craft Wax Statue mold | Description rtv2 platinum based silicone rubber chocolate candle craft Wax Statue moldPlatinum cure/addition silicone is a kind of two parts silico... |
 |
RTV potting compound silicone rubber good dielectric properties versatile cure | RTV potting compound silicone rubber good dielectric properties versatile cure Description Two-component silicone,platinum-curing/ addition-cure... |
 |
platinum cure silicone rubber prosthesis hands foot ear product liquid silicone | platinum cure silicone rubber prosthesis hands foot ear product liquid silicone Description Two-component silicone,platinum-curing/ addition-cur... |
 |
rtv2 liquid platinum cure silicone rubber molding high quality cheap price | rtv2 liquid platinum cure silicone rubber molding high quality cheap price Description Two-component silicone,platinum-curing/ addition-cure type... |
 |
two parts tin cure silicone rubber for mold free sample | 1. Description Two-component silicone, tin-curing, flowable, vulcanizes at room temperature. Can be used for a long time in the temperature range... |
Same products
 |
5.4,4'-Oxydiphenol CAS 1965-09-9 | Seller: Yufeng International Group Co., Ltd | Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-... |
 |
1,1,2,2-Tetrachloroethane CAS 79-34-5 | Seller: Yufeng International Group Co., Ltd | Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te... |
 |
3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9 | Seller: Yufeng International Group Co., Ltd | Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,... |
 |
2.1,1,2-Trichloroethane CAS 79-00-5 | Seller: Yufeng International Group Co., Ltd | Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-... |
 |
1.1,1,2,2-Tetrachloroethane CAS 79-34-5 | Seller: Yufeng International Group Co., Ltd | Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te... |
