rtv2 liquid tin cure silicone rubber soap candle art craft mold
rtv2 liquid tin cure silicone rubber soap candle art craft mold
Description
Two-component silicone, tin-curing, flowable, vulcanizes at room temperature.Can be used for a long time in the temperature range of - 65 ° C - 200 ° C and keep its soft and elastic properties.
Application
General mold making.
Suitable for reproducing and replicating products in large quantity for industries: Art crafts, sculptures, furniture, architectural elements, garden ornaments, tire, soap, candle and so on.
Used for making molds for variety of material, such as resin, PU, gypsum, plaster, concrete, cement, stone, GRC, PVC, polyester, wax, bronze and so on.
Features& Advantages
²Low shrinkage
²Anti-deformation
²Not oily,
²No bubbles
²Excellent flow levelingwhich will copy finest details and patterns from exquisite products.
²Durable with excellent tear and tensile strength, guarantee molding times
²Easily demolding
²Resist aging, acid,alkali,corrosionand weather aging
²Thixotropic agent/ thickening agent is available for brushing molding method
Typical propertiesINI-620
|
PropertiesIndex |
Test Report |
|
|
Before Curing |
Appearance |
White/ Translucentfluid |
|
Viscosity（cps） |
15000±1000 (Adjustable) |
|
|
Operating |
Mixing Ratio （By weight） |
100：2 |
|
Operating Time（25℃/min） |
30～50 (Adjustable) |
|
|
Curing time（hr,basically cured） |
3~5 (Adjustable) |
|
|
Curing time（hr, perfectly cured） |
12 |
|
|
After Curing |
Hardness (shore A) |
20±2 |
|
Tear strength (kN/m) |
21±3 |
|
|
Tensile strength (Mpa) |
4.4±0.5 |
|
|
Shrinkage (%) |
≤0.3 |
|
|
Elongation (%) |
405~500 |
|
|
Density (g/cm) |
1.08 |
|
Operation instructions
1.Mix part A and pars B evenly with 100:2 mixing ratio.
Notes: 1) Weigh the two parts exactly by electronic weight. For example, the operation time will be shorten after adding too much catalyst.
2)Mix part A and part B evenly. Otherwise the silicon rubber will be partly solidified which will make the finished molds meet a short life and waste silicon rubber.
2.Vacuum pumping
Notes: 1) This step is not have to have, but it is best if there is one. It will discharge all air in the mixture successfully, so as to ensure that therewill be no bubbles in the finished mold.
2) This step is less than 10 minutes. Otherwise, it will cause cross-linking reaction, and no morefurther steps will be available.
- Pouring casting or Brush molding
Notes:1) For simple pattern products we suggest use pouring operation way, which will be very easy to operate and demould. Pourable silicone require low viscosity which will be easy to flow smoothly and easy to de-air.
2)For delicate pattern products we suggest use brushing operation way, which can copy the pattern exactly. Brushable silicone require high viscosity which won’t be easy to flow away and easy to brush.
3)We suggest to set the mold for another 12 hours after demould before put it into large production.
Package
5KG, 20KG, 25KG and 200KG per drum.
(There are metal drum and plastic drum for your choice for 5KG and 20KG)
Shelf life
Twelve(12) months when stored under dry and cool place by original package under 25℃.
WhyChooseus
1.Powerfulfactorywithaproductioncapacityof8000perday, we are the more than 10 years factory in China, with excellent and stable quality.
2.High-endresearchanddevelopment(freesample)
BeingaleadingliquidsiliconemanufacturerinChina,wehaveaprofessionalR&DteamandQCteam(12experts)andourproductisRoHS,MSDS,ISO,REACH,ULapproved,sothereisnoneedtoworryaboutthequality.
3,Efficientservice
Wecanprovidefreetrainingofsiliconetechniqueandfreesiliconesamples.wehaveaprofessionalsalesteamwhowillsolveyourproblemspatiently.Besides,withefficientlogisticsdistributionsystem,youcouldgetyougoodsearlier.Last,goodaftersalesservice,webuildlongtermcooperationrelationship,oncethereisqualityproblem,wecouldsolverightaway.Moreimportantly,returnandexchangeareacceptedwhilequalityproblemsoccurred.
We can provide the free sample, more details about silicone rubber, pls contact Ms Lisa at:
Mobile/ Whatsapp/: +86 188 1670 2967
2967or A108059
E-mail:lisasilicone(at)
Twitter/Facebook:lisasilicone
Send product request
Other supplier products
 |
two parts silicon Resin Climbing wall Holds Molds polyurethane rubber silicone | two parts silicon Resin Climbing wall Holds Molds polyurethane rubber silicone Description Two-component silicone, tin-curing, flowable, vulcaniz... |
 |
clear platinum cure silicone rubber jewelry molding high quality free sample | clear platinum cure silicone rubber jewelry molding high quality free sample Description High transparency, two-component silicone,platinum-curin... |
 |
Pad printing silicone rubber liquid raw material elastic material electronic | Pad printing silicone rubber liquid raw material elastic material electronic Description Two-component silicone, tin-curing, flowable, vulcanizes... |
 |
RTV potting compound silicone rubber good dielectric properties versatile cure | RTV potting compound silicone rubber good dielectric properties versatile cure Description Two-component silicone,platinum-curing/ addition-cure... |
 |
UL 94 V0 grade silicone encapsulating potting compound sensors led pcb | UL 94 V0 grade silicone encapsulating potting compound sensors led pcb Description Two-component silicone,platinum-curing/ addition-cure type, f... |
Same products
 |
Trimellitic anhydride 97% | Seller: Yufeng International Group Co., Ltd | Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a... |
 |
Isobutyric Anhydride CAS 97-72-3 | Seller: Yufeng International Group Co., Ltd | Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo... |
 |
Isobutyric Acid CAS 79-31-2 | Seller: Yufeng International Group Co., Ltd | Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met... |
 |
2-Amino-2-methyl-1-propanol（AMP）CAS：124-68-5 | Seller: Yufeng International Group Co., Ltd | AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and... |
 |
Dimethyl sulfoxide (DMSO) CAS: 67-68-5 | Seller: Yufeng International Group Co., Ltd | Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture... |
