Ultra-Pure Hydrogen
Product Details
Product Names
Ultra-Pure Hydrogen
High-Purity Hydrogen
Hydrogen
Purity
Ultra-Pure Hydrogen: ≥99.9999%
High-Purity Hydrogen: ≥99.999%
Impurity Content (ppm)
| Impurity | Ultra-Pure Hydrogen | High-Purity Hydrogen |
|---|---|---|
| Water (H₂O) | ≤0.5 | ≤3 |
| Oxygen (O₂) | ≤0.2 | ≤1 |
| Nitrogen (N₂) | ≤0.4 | ≤5 |
| Carbon Monoxide (CO) | ≤0.1 | ≤1 |
| Carbon Dioxide (CO₂) | ≤0.1 | ≤1 |
| Hydrocarbons (THC) | ≤0.2 | ≤1 |
Packaging
Filled in steel cylinders of 40L, 49L, 50L, and also available in smaller cylinders of 8-10L upon customer request.
Applications
Recommended for industrial use, synthesis of ammonia and methanol, petroleum refining, hydrogenation of organic compounds, etc.
Safety Information
CAS Number: 1333-74-0.
Physical and Chemical Properties: Colorless and odorless gas. Insoluble in water, ethanol, and ether. Melting point (℃): -259.2; Boiling point (℃): -252.8; Relative density (water=1): 1.20 (-246℃); Relative density (air=1): 0.7; Saturation vapor pressure (kPa): 101.32 (-246℃); Flash point (℃): Not applicable; Combustion heat (kJ/mol): Not applicable; Critical temperature (℃): -228.7; Critical pressure (MPa): 2.73; Upper explosion limit (v%): Not applicable; Lower explosion limit (v%): Not applicable; Ignition temperature (℃): Not applicable.
Combustion and Explosion Hazards: Non-flammable. Under high heat, the pressure inside the container may increase, posing a risk of rupture and explosion.
Firefighting Methods: Flammable, forms explosive mixtures with air. Can explode when exposed to heat or open flame. Lighter than air, leaks can rise and linger in indoor spaces, posing an explosion risk if ignited. Reacts violently with halogens such as fluorine, chlorine, and bromine. Cut off the gas supply. Do not extinguish the fire if the gas supply cannot be cut off. Firefighters must wear air呼吸器 (respirators) and full protective clothing, and fight the fire from the upwind direction. Remove containers from the fire area if possible. Cool the containers with water until the fire is out. Fire extinguishing agents: water spray, foam, carbon dioxide, dry powder.
Health Hazards: Physiologically inert gas, can cause asphyxiation at high concentrations due to reduced oxygen partial pressure. Can exhibit anesthetic effects at very high pressures. Symptoms of oxygen deprivation include palpitations, shortness of breath, dizziness, headache, weakness, vertigo, nausea, vomiting, tinnitus, blurred vision, and impaired judgment. Severe cases can quickly progress to mental confusion, loss of consciousness, and potentially respiratory and circulatory failure.
First Aid Measures: Inhalation: Quickly move to a fresh air area. Keep the airway clear. If breathing is difficult, administer oxygen. If breathing stops, perform artificial respiration immediately. If breathing and heartbeat stop, perform artificial respiration and external chest compressions immediately.
Send product request
Other supplier products
 |
Polyester Powder Coating | Product Introduction:This series of products is a thermosetting powder coating made from a mixture of saturated polyester resin, corresponding curi... |
 |
Fluoropolymer MT-2613 | MT-2613 polymer processing aid is a free-flowing white powder containing 97% active ingredients. This product is used to improve the processing per... |
 |
Epoxy Anti-Corrosion Powder Coating for Coal Mine Gas Drainage Pipes | Product Introduction: This product is formulated using phenolic epoxy resin and incorporates self-developed conductive polymers and conductive mat... |
 |
High temperature-resistant powder coating | Introduction As the application scope of powder coating continues to expand, some extreme environments have put forward higher requirements for po... |
 |
Ordinary Wood Grain Powder | Introduction Ordinary wood grain powder is a specialized powder coating designed to mimic the natural texture and appearance of wood. It is widely... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
