Ultra-Pure Hydrogen
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Details
Product Names
Ultra-Pure Hydrogen
High-Purity Hydrogen
Hydrogen
Purity
Ultra-Pure Hydrogen: ≥99.9999%
High-Purity Hydrogen: ≥99.999%
Impurity Content (ppm)
| Impurity | Ultra-Pure Hydrogen | High-Purity Hydrogen |
|---|---|---|
| Water (H₂O) | ≤0.5 | ≤3 |
| Oxygen (O₂) | ≤0.2 | ≤1 |
| Nitrogen (N₂) | ≤0.4 | ≤5 |
| Carbon Monoxide (CO) | ≤0.1 | ≤1 |
| Carbon Dioxide (CO₂) | ≤0.1 | ≤1 |
| Hydrocarbons (THC) | ≤0.2 | ≤1 |
Packaging
Filled in steel cylinders of 40L, 49L, 50L, and also available in smaller cylinders of 8-10L upon customer request.
Applications
Recommended for industrial use, synthesis of ammonia and methanol, petroleum refining, hydrogenation of organic compounds, etc.
Safety Information
CAS Number: 1333-74-0.
Physical and Chemical Properties: Colorless and odorless gas. Insoluble in water, ethanol, and ether. Melting point (℃): -259.2; Boiling point (℃): -252.8; Relative density (water=1): 1.20 (-246℃); Relative density (air=1): 0.7; Saturation vapor pressure (kPa): 101.32 (-246℃); Flash point (℃): Not applicable; Combustion heat (kJ/mol): Not applicable; Critical temperature (℃): -228.7; Critical pressure (MPa): 2.73; Upper explosion limit (v%): Not applicable; Lower explosion limit (v%): Not applicable; Ignition temperature (℃): Not applicable.
Combustion and Explosion Hazards: Non-flammable. Under high heat, the pressure inside the container may increase, posing a risk of rupture and explosion.
Firefighting Methods: Flammable, forms explosive mixtures with air. Can explode when exposed to heat or open flame. Lighter than air, leaks can rise and linger in indoor spaces, posing an explosion risk if ignited. Reacts violently with halogens such as fluorine, chlorine, and bromine. Cut off the gas supply. Do not extinguish the fire if the gas supply cannot be cut off. Firefighters must wear air呼吸器 (respirators) and full protective clothing, and fight the fire from the upwind direction. Remove containers from the fire area if possible. Cool the containers with water until the fire is out. Fire extinguishing agents: water spray, foam, carbon dioxide, dry powder.
Health Hazards: Physiologically inert gas, can cause asphyxiation at high concentrations due to reduced oxygen partial pressure. Can exhibit anesthetic effects at very high pressures. Symptoms of oxygen deprivation include palpitations, shortness of breath, dizziness, headache, weakness, vertigo, nausea, vomiting, tinnitus, blurred vision, and impaired judgment. Severe cases can quickly progress to mental confusion, loss of consciousness, and potentially respiratory and circulatory failure.
First Aid Measures: Inhalation: Quickly move to a fresh air area. Keep the airway clear. If breathing is difficult, administer oxygen. If breathing stops, perform artificial respiration immediately. If breathing and heartbeat stop, perform artificial respiration and external chest compressions immediately.
在线联系供应商
Other supplier products
 |
PVF oil pipe coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Introduction Used for automobile oil pipes. PVF coating characteristics: (PVF) ... |
 |
PVC Powder Coating for Chemical Corrosion Resistance | WA：+86 132 6275 2056 WEB: std-coatings.com Product Overview PVC Powder Coating for Chemical Corrosion Resistance is developed to protect metal c... |
 |
Weather Resistant Polyethylene PE Powder Coating | WA：+86 132 6275 2056 WEB: std-coatings.com Product Overview Weather Resistant Polyethylene PE Powder Coating is a thermoplastic polyethylene-bas... |
 |
Epoxy-Polyester Thermosetting Electrostatic Spray Powder Coating | Product Overview Model: MT-062A Yellow powder coating Epoxy-polyester thermosetting electrostatic spray powder coating is a hybrid material combi... |
 |
Epoxy Anti-Corrosion Powder Coating for Coal Mine Gas Drainage Pipes | Product Introduction: This product is formulated using phenolic epoxy resin and incorporates self-developed conductive polymers and conductive mat... |
Same products
 |
Procaine | 卖方: 862043 | CAS:59-46-1 |
 |
High Concentration Plastic Color Masterbatch Factory Direct Supply | 卖方: 861445 | We are a professional color masterbatch manufacturer with years of R&D experience in plastic ... |
 |
Acid Ink Blue G Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ... |
 |
Acid Black ATT Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o... |
 |
Acid Black 10B Factory | 卖方: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri... |
