Ultra-Pure Helium
Product Details
Product Names
Ultra-Pure Helium
Purity
Ultra-Pure Helium: ≥99.9999%
High-Purity Helium: ≥99.999%
Impurity Content (ppm)
| Impurity | Ultra-Pure Helium | High-Purity Helium |
|---|---|---|
| Water (H₂O) | ≤0.5 | ≤3 |
| Oxygen (O₂+Ar) | ≤0.1 | ≤1 |
| Nitrogen (N₂) | ≤0.5 | ≤2 |
| Carbon Monoxide (CO) | ≤0.1 | ≤0.5 |
| Carbon Dioxide (CO₂) | ≤0.1 | ≤0.5 |
| Hydrocarbons (THC) | ≤0.1 | ≤0.5 |
Packaging
Filled in steel cylinders of 40L, 49L, 50L, and also available in smaller cylinders of 8-10L upon customer request.
Applications
Helium is widely used in military, scientific research, petrochemical, refrigeration, medical, semiconductor, pipeline leak detection, superconductivity experiments, metal manufacturing, deep-sea diving, precision welding, and optoelectronic product manufacturing.
Safety Information
CAS Number: 7440-59-7.
Physical and Chemical Properties: Colorless and odorless inert gas. Insoluble in water and ethanol. Melting point (℃): -272.1; Boiling point (℃): -268.9; Relative density (water=1): 0.15 (-271℃); Relative density (air=1): 0.14; Saturation vapor pressure (kPa): 202.64 (-268℃); Flash point (℃): Not applicable; Combustion heat (kJ/mol): Not applicable; Critical temperature (℃): -267.9; Critical pressure (MPa): 2.3; Upper explosion limit (v%): Not applicable; Lower explosion limit (v%): Not applicable; Ignition temperature (℃): Not applicable.
Combustion and Explosion Hazards: Non-flammable. Under high heat, the pressure inside the container may increase, posing a risk of rupture and explosion.
Firefighting Methods: Non-flammable. Remove containers from the fire area if possible. Spray water to keep the containers cool until the fire is out. Evacuate people to the upwind side and isolate the contaminated area. Emergency personnel should wear self-contained positive pressure breathing apparatus and general work clothes. Cut off the leak source if possible. Ensure adequate ventilation to disperse the gas. Handle the leaking container properly, repair and inspect before reuse.
Health Hazards: Inert gas, high concentrations can reduce oxygen partial pressure and pose a risk of asphyxiation. Symptoms include increased breathing rate, lack of concentration, ataxia, followed by fatigue, restlessness, nausea, vomiting, coma, convulsions, and potentially death.
First Aid Measures: Inhalation: Quickly move to a fresh air area. Keep the airway clear. If breathing is difficult, administer oxygen. If breathing stops, perform artificial respiration immediately. If breathing and heartbeat stop, perform artificial respiration and external chest compressions immediately.
Send product request
Other supplier products
 |
Polyester Powder Coatings – Full Product Range | Introduction We provide a comprehensive range of polyester powder coatings for various industrial applications. Our coatings are factory-direct f... |
 |
Brown Series Powder Coating | Introduction We supply a full range of brown powder coatings—from classic chocolate brown to elegant bronze—direct from our factory in... |
 |
Lithium bis(trifluoromethanesulphonyl)imide CAS 90076-65-6 | CAS 90076-65-6 EINECS 415-300-0 InChI InChI=1/C2F6NO4S2.Li/c3-1(4.5)14(10.11)9-15(12.13)2(6.7)8;/q-1;+1 InChIKey QSZMZKB... |
|
|
Metallic matte MT-019/92039 | Introduction No. MT-019/92039 Color Metallic color Surface Metallic matte System Weather-resistant polyester Sco... |
|
|
Powder coatings for coil springs and torsion bars | Product Description MT-A1242 powder coating has an excellent line of coatings for coil springs, and torsion bars essential to the safe performance... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
