Ultra-Pure Helium
Product Details
Product Names
Ultra-Pure Helium
Purity
Ultra-Pure Helium: ≥99.9999%
High-Purity Helium: ≥99.999%
Impurity Content (ppm)
| Impurity | Ultra-Pure Helium | High-Purity Helium |
|---|---|---|
| Water (H₂O) | ≤0.5 | ≤3 |
| Oxygen (O₂+Ar) | ≤0.1 | ≤1 |
| Nitrogen (N₂) | ≤0.5 | ≤2 |
| Carbon Monoxide (CO) | ≤0.1 | ≤0.5 |
| Carbon Dioxide (CO₂) | ≤0.1 | ≤0.5 |
| Hydrocarbons (THC) | ≤0.1 | ≤0.5 |
Packaging
Filled in steel cylinders of 40L, 49L, 50L, and also available in smaller cylinders of 8-10L upon customer request.
Applications
Helium is widely used in military, scientific research, petrochemical, refrigeration, medical, semiconductor, pipeline leak detection, superconductivity experiments, metal manufacturing, deep-sea diving, precision welding, and optoelectronic product manufacturing.
Safety Information
CAS Number: 7440-59-7.
Physical and Chemical Properties: Colorless and odorless inert gas. Insoluble in water and ethanol. Melting point (℃): -272.1; Boiling point (℃): -268.9; Relative density (water=1): 0.15 (-271℃); Relative density (air=1): 0.14; Saturation vapor pressure (kPa): 202.64 (-268℃); Flash point (℃): Not applicable; Combustion heat (kJ/mol): Not applicable; Critical temperature (℃): -267.9; Critical pressure (MPa): 2.3; Upper explosion limit (v%): Not applicable; Lower explosion limit (v%): Not applicable; Ignition temperature (℃): Not applicable.
Combustion and Explosion Hazards: Non-flammable. Under high heat, the pressure inside the container may increase, posing a risk of rupture and explosion.
Firefighting Methods: Non-flammable. Remove containers from the fire area if possible. Spray water to keep the containers cool until the fire is out. Evacuate people to the upwind side and isolate the contaminated area. Emergency personnel should wear self-contained positive pressure breathing apparatus and general work clothes. Cut off the leak source if possible. Ensure adequate ventilation to disperse the gas. Handle the leaking container properly, repair and inspect before reuse.
Health Hazards: Inert gas, high concentrations can reduce oxygen partial pressure and pose a risk of asphyxiation. Symptoms include increased breathing rate, lack of concentration, ataxia, followed by fatigue, restlessness, nausea, vomiting, coma, convulsions, and potentially death.
First Aid Measures: Inhalation: Quickly move to a fresh air area. Keep the airway clear. If breathing is difficult, administer oxygen. If breathing stops, perform artificial respiration immediately. If breathing and heartbeat stop, perform artificial respiration and external chest compressions immediately.
在线联系供应商
Other supplier products
 |
STD A7750 | Product Introduction: Chemical Name: Compound of N,N’-bis(1.4-dimethylpentyl)-p-phenylenediamine and carbon black N330 CAS Registration Num... |
 |
Coating for Busbar by Electrostatic Spray Application | Product Description MT-EL-HLF59R is a one part, 100 % solids, epoxy powder coating for insulation of wire and busbars. Designed for electrostatic ... |
 |
FEVE fluorocarbon powder coating | Introduction FEVE (Fluoroethylene Vinyl Ether) fluorocarbon powder coating represents a breakthrough in high-performance protective finishes. Comb... |
 |
Flat high gloss MT-0497B666 | Introduction No. MT-049/7B666 Color White Surface Flat high gloss System Polyester Scope of application Lightin... |
 |
Powder Coating For Imitation Wood Grain | Introduction With the improvement of people’s environmental awareness, coating applications are becoming increasingly popular, especially ar... |
Same products
 |
Trimellitic anhydride 97% | 卖方: Yufeng International Group Co., Ltd | Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a... |
 |
Isobutyric Anhydride CAS 97-72-3 | 卖方: Yufeng International Group Co., Ltd | Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo... |
 |
Isobutyric Acid CAS 79-31-2 | 卖方: Yufeng International Group Co., Ltd | Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met... |
 |
2-Amino-2-methyl-1-propanol（AMP）CAS：124-68-5 | 卖方: Yufeng International Group Co., Ltd | AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and... |
 |
Dimethyl sulfoxide (DMSO) CAS: 67-68-5 | 卖方: Yufeng International Group Co., Ltd | Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture... |
