Waterborne two-component hydroxylated acrylic dispersion with high thick coating performance STD 2035
Product Description
Waterborne two-component hydroxylated acrylic dispersion with high thick coating performance STD 2035 is a hydroxyfunctional polyacrylic dispersion designed for vehicle,machinery and anticorrosion coating. In combination with polyisocyanates or other crosslinkers, it can be used for tow-component coating. It also can be used for one component baking coating with amino resins or blocked polyisocyanates. Approx. 46% in water/solvent naphtha 100/1-butoxy-2-propanol, approx. 44:4:4. Neutralizing agent,N,N-dimethyl ethanolamine(<2wt%), bound as a salt.
Properties
1. High gloss, gloss (60°) > 92%.
2. Excellent resistance to chemicals and salt spray.
3. Good weather resistance.
4. High hardness, hardness (combination with polyisocyanates) 2H.
Characteristic data
| Property | Value | Unit |
| Appearance | Milky white liquid | % |
| Weight solids | 46±1 | |
| pH | 7.0-9.0 | |
| Viscosity | 150-3800 | mPa·s |
| OH content | 4.2 | % |
| Density | 1.06 | g/cm3 |
*These properties are typical but do not constitute specifications.
Storage
The product should be stored in dry conditions above 5°C and below 35°C with the integrity of the packaging, and prevent direct sunlight. The validity of this product is for 6 months, performance assessment is recommended before use after shelf life. The product should be protected from freezing during storage. It is suggested to filter before application and use up once the package is open.The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be adjusted to its original value by the addition of small amounts of an aqueous 10% solution of N,N-dimethyl ethanolamine.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
PVDF Powder Coating for Chemical Corrosion Resistance | 1. Fluoropolymer Powder Coatings The ultimate protection for extreme durability and long-term performance. Key Advantages: UV & Weat... |
 |
Metallic flat matte MT-629/94737 | Introduction No. MT-629/94737 Color Metallic gray Surface Metallic flat matte System Super weather-resistant polyeste... |
 |
Pure epoxy powder coating/industrial powder coating production line | Product model CH Product characteristics Excellent performance, strong versatility, excellent corrosion resistance and electrical insulation. P... |
 |
(DPS) Dual-Layer Epoxy Anti-Corrosion Powder Coating/powder coating for engineering service providers | Product Introduction:This dual-layer epoxy powder coating system is carefully formulated using special epoxy resins and functional curing agents. T... |
 |
Architectural Powder Coating | About Our Architectural Powder Coatings We are a leading powder coating manufacturer based in China, specializing in high-performance architectura... |
Same products
 |
Trimellitic anhydride 97% | Seller: Yufeng International Group Co., Ltd | Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a... |
 |
Isobutyric Anhydride CAS 97-72-3 | Seller: Yufeng International Group Co., Ltd | Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo... |
 |
Isobutyric Acid CAS 79-31-2 | Seller: Yufeng International Group Co., Ltd | Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met... |
 |
2-Amino-2-methyl-1-propanol（AMP）CAS：124-68-5 | Seller: Yufeng International Group Co., Ltd | AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and... |
 |
Dimethyl sulfoxide (DMSO) CAS: 67-68-5 | Seller: Yufeng International Group Co., Ltd | Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture... |
