Powder coating primer
Product Description
MT-Active is a powder coating primer, totally free from Zinc. It is designed to give enhanced corrosion protection of mild steel and is an epoxy-polyester primer including active anticorrosive pigments. The addition of these pigments provides a steel passivation effect to protect the substrate enhancing the performance when compared to other non-active systems.
Powder Properties
| Chemical type | Thermosetting epoxy-polyester |
| Appearance | Smooth |
| Gloss level (60°) | 50-60 units |
| Color | Grey |
| Recommended Film Thickness (µm) | 60 – 80 µm |
| Density (g/cm3) | 1.65 – 1.70 g/cm³ |
| Application | Electrostatic |
| Storage | Under dry, cool (≤ 30°C) conditions |
| Shelf life | At least 12 months from production date |
Mechanical Tests
| Flexibility (Cylindrical Mandrel) | ASTM D522-93A | Pass 3 mm (Primer)
Pass 10 mm (System) |
| Adhesion | ASTM D3359-97 (2mm crosshatch) | Class 0 (Primer)
Class 0 (System) |
| Erichsen Cupping | ASTM 643-84 | Pass 5 mm (Primer)
Pass 4 mm (System) |
| Impact | ASTM D2794 | Pass 0.4 kg·m (Primer)
Pass 0.3 kg·m (System) |
Pretreatment
Surface preparation depends upon the metal, the type of surface, its conditions and the required performance.
| Substrate | Mechanical pretreatment | Chemical pretreatment |
| Mild steel | Grit Blasting Sa 2.5 in accordance with ISO NF EN 8501-1. Roughness: Rz 42 84 µm / Ra 6-12 µm | Degreasing & phosphating (or equivalent) followed by passivation, DW rinsing and drying. |
| Cast steel | ||
| Electro Zinc steel | Sweep blasting with a maximum zinc layer thickness reduction of 5 to 10 µm depending on the initial zinc thickness | |
| Hot dip galvanized stee | Degreasing & phosphating / chromating followed by passivation. | |
| flame/electrical deposition) | Grit Blasting Sa 3 in accordance with ISO NF EN 8501-1. Roughness: Rz 42 84 µm / Ra 6-12 µm | Banned |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Superdurable polyester powder coatings with metallic finish MT-D2525 Brilliance | Product description MT-D2525 Brilliance is a series of ultra-durable powder coatings specifically formulated without TGIC, intended for use on arc... |
 |
Flat matte MT-049/16022 | Introduction No. MT-049/16022 Color White Surface Flat matte System Polyester Scope of application Lighting acc... |
 |
RAL7035 Wrinkle Textured Grey Polyester Powder Coating | Gloss and color range: Gloss levels range from 20- 90% and above. A wide range colors are available ,certain color is subjectto the technical app... |
 |
Jade Scenery in Cuigu, Jiangsu powder coating | Characteristics of powder coatings 1. The coating film is flat and smooth; 2. The paint film has good physical and mechanical properties, especia... |
 |
Powder coating series for vehicle compartment/powder coating with SGS report | With the development of environmental protection and energy conservation, the central environmental protection department and local governments hav... |
Same products
 |
L-Cystine dihydrochloride Manufacturer | Seller: 846340 | Chemical Structure L‑cystine is formed by oxidative dimerization of two L‑cysteine molecules v... |
 |
L-Cystine dihydrochloride Supplier | Seller: 846340 | L-cysteine is a sulfur-containing non-essential amino acid, being the dimeric form of L-cysteine.... |
 |
L-Cystine dihydrochloride powder | Seller: 846340 | Main Applications ofL-Cystine dihydrochloride Cell Culture Media Essential supplement... |
 |
L-Cystine dihydrochloride 30925-07-6 | Seller: 846340 | Key Properties & Advantages ofL-Cystine dihydrochloride Solubility Boost Free L‑c... |
 |
L-Cystine dihydrochloride | Seller: 846340 | L‑Cystine dihydrochloride is the dihydrochloride salt form of L‑cystine, a sulfur‑containing amin... |
