Powder coating primer
Product Description
MT-Active is a powder coating primer, totally free from Zinc. It is designed to give enhanced corrosion protection of mild steel and is an epoxy-polyester primer including active anticorrosive pigments. The addition of these pigments provides a steel passivation effect to protect the substrate enhancing the performance when compared to other non-active systems.
Powder Properties
| Chemical type | Thermosetting epoxy-polyester |
| Appearance | Smooth |
| Gloss level (60°) | 50-60 units |
| Color | Grey |
| Recommended Film Thickness (µm) | 60 – 80 µm |
| Density (g/cm3) | 1.65 – 1.70 g/cm³ |
| Application | Electrostatic |
| Storage | Under dry, cool (≤ 30°C) conditions |
| Shelf life | At least 12 months from production date |
Mechanical Tests
| Flexibility (Cylindrical Mandrel) | ASTM D522-93A | Pass 3 mm (Primer)
Pass 10 mm (System) |
| Adhesion | ASTM D3359-97 (2mm crosshatch) | Class 0 (Primer)
Class 0 (System) |
| Erichsen Cupping | ASTM 643-84 | Pass 5 mm (Primer)
Pass 4 mm (System) |
| Impact | ASTM D2794 | Pass 0.4 kg·m (Primer)
Pass 0.3 kg·m (System) |
Pretreatment
Surface preparation depends upon the metal, the type of surface, its conditions and the required performance.
| Substrate | Mechanical pretreatment | Chemical pretreatment |
| Mild steel | Grit Blasting Sa 2.5 in accordance with ISO NF EN 8501-1. Roughness: Rz 42 84 µm / Ra 6-12 µm | Degreasing & phosphating (or equivalent) followed by passivation, DW rinsing and drying. |
| Cast steel | ||
| Electro Zinc steel | Sweep blasting with a maximum zinc layer thickness reduction of 5 to 10 µm depending on the initial zinc thickness | |
| Hot dip galvanized stee | Degreasing & phosphating / chromating followed by passivation. | |
| flame/electrical deposition) | Grit Blasting Sa 3 in accordance with ISO NF EN 8501-1. Roughness: Rz 42 84 µm / Ra 6-12 µm | Banned |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Antistatic powder coating | Application parameters: Curing time:200℃×10–15 minutes Spraying method:High voltage electrostatic spraying 60-80 KV Recommended film... |
 |
Chromium(III) phosphate STD-CP 4295 | Chemical Structure Chromium(III) phosphate Anticorrosive pigment providing adhesion promotion based on Chromium(III) phosphate. Often used in co... |
 |
Purple powder coating | Purple Powder Coating – Classification, Applications & Advantages ClassificationTypical ApplicationsProduct Advantages Glossy... |
 |
Food Grade Powder Coatings –project powder coating | Food grade powder coatings are specially formulated solvent-free, non-toxic coatings that meet FDA and EU food contact regulations. They are design... |
 |
Orange-Red Pearlescent Powder Coating | Introduction Key attributesDetails Place of Origin China EINECS No. 77510 Usage Ceramic Pigments, Coating Pigment,... |
Похожие товары
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Продавец: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Продавец: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Продавец: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Продавец: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Продавец: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
