560℃ High Gloss Mirror Chrome and Metallic Bonding Powder Coating
Feature
— The metallic pigment can be better melt with the bottom powder and will not jam the spray gun while spraying.
— Strong adhesion between the metal powder and the base material. The powder is hard to fall off while spraying.
— Good compatibility for the the spraying effect between recovery powder coating and new powder.
— The metallic powder is hard to fall off and be oxided and there is no fingerprint problem.
Density:
1.2~1.8g/cm3( Ingredient and color demand)
Particle Size:
Purpose demands, standard granularity is 35-40 um, <10um powder <10%, >100um powder <0.5%.
Storage stability:
Bonding Metallic Powder Coatings should be stored below 35°C in a dry and well ventilated place away from source of heat, ignition and direct sunlight. If stored in an air-conditioner room, in order to avoid damp again, before using the powder, the powder should be kept at the room temperature or at the same temperature with the spray equipment. Under such condition, the powder can be stored stably for 12 months.
Extended, retest will be required. If the testing result meets the requirement, the powder can still be used.
Note:For the low temperature curing powder with the gloss below 40%(60°),the better stored temperature is below 30℃.
Field of Application:
Bonding Metallic Powder Coatings refers to all kinds of powder coatings which contains metallic pigments (such as: copper and golden powder, silver and aluminum powder, pearlescent pigments ). Because of its colorful decorative coating effect, this series of products is very suitable for the spraying of fitness equipment, furniture and cars etc.
Special Effects:
All kinds of wrinkle and compound colors etc. As for the use of special surface coating, please refer to the usage guide of our company
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
General Powder Coatings –powder coating factory OEM service | Our standard powder coatings are designed for a wide range of applications, including appliances, furniture, automotive parts, metal panels, indust... |
 |
Powder coatings for Home Plaza | Surface Finish Options Overview Characteristics of powder coatings 1. The coating film is flat and smooth; 2. The paint film has good ph... |
 |
Glass powder coating | Introduction Changed the traditional spraying process, from oily or water-resistant paint to thermosetting powder coating, which is sprayed and ba... |
 |
Medium density fiberboard powder coating(MDF) | General Description： This product is a powder coating specially formulated and manufactured for medium-density fiberboard (MDF) substrates. The c... |
 |
Anti-graffiti powder coating | Brief description This series of products is based on saturated hydrocarbon polyester resin and isocyanate curing agent as the main base material,... |
Same products
 |
5.4,4'-Oxydiphenol CAS 1965-09-9 | Seller: Yufeng International Group Co., Ltd | Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-... |
 |
1,1,2,2-Tetrachloroethane CAS 79-34-5 | Seller: Yufeng International Group Co., Ltd | Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te... |
 |
3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9 | Seller: Yufeng International Group Co., Ltd | Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,... |
 |
2.1,1,2-Trichloroethane CAS 79-00-5 | Seller: Yufeng International Group Co., Ltd | Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-... |
 |
1.1,1,2,2-Tetrachloroethane CAS 79-34-5 | Seller: Yufeng International Group Co., Ltd | Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te... |
