High Reflectivity (Infrared Camouflage Cooling) Powder Series/metal powder coating factory
Introduction
Powder coatings that reflect infrared radiation reduce the surface temperature of building facades by up to 20 percent. This “sun protection” extends the life of the facade and reduces operating costs.
Heavily heated façades increase indoor temperatures and intensify the heat in cities. moutainchem-Reflective powder coatings specifically reflect infrared radiation and reduce surface heating by up to 20 percent. This reduces the radiator effect, protects the building structure and lowers the energy requirement for air conditioning. At the same time, the color and design can be freely selected so that steel and aluminum facades are optimally protected. The certified powder coatings offer durability and enable energy-efficient and environmentally conscious construction.
Surfaces can reduce energy absorption through radiation
Longer periods of heat and stronger solar radiation increase the load on urban building envelopes. A large proportion of solar radiation is in the near-infrared range (NIR: 780 – 1,400 nanometers) and contributes to surface heating. This heating affects material stability, thermal expansion and the cooling requirements of buildings. Suitable surfaces can significantly reduce energy absorption through radiation. Anyone who takes a closer look will be familiar with the effects from everyday life: dark gray sliding doors often run more heavily on their guides in summer, hot summer winds sweep through the streets in cities and dark painted surfaces heat up particularly strongly under a cloudless sky. The reason for this is that surfaces not only absorb visible light, but also infrared radiation, particularly from the near-infrared spectrum, which is crucial for heating.
Thermal relief through smart surface technology
IGP-Reflective technology combines the highly weather-resistant moutainchem-powder coating with optimized infrared properties. Thanks to the increased reflection of infrared radiation, the surface temperature of coated façade surfaces remains noticeably lower. The effect: less material deformation, a longer façade service life and lower operating costs.
The special pigments used by moutainchem Powder Coatings increase the TSR value (Total Solar Reflectance) and reduce surface heating by up to 20 percent. This reduces the so-called radiator effect. Heated façades act less like radiators, emitting heat to their surroundings. Thermal stresses caused by different expansion of connected metals (bimetal effect) are also reduced. This protects the building structure and increases the durability of the façade. At the same time, the indoor climate is improved as less heat is transferred into the interior of the building. This lowers the energy required for cooling and reduces the amount of heat emitted into the urban space. In this way, the coatings make an effective contribution to reducing the urban heat island effect.
The powder coatings have been specially developed for steel and aluminum façades. Their formulation is designed to optimize the reflectivity of the coating system. The series is available in different variants: smooth gradient in satin gloss and matt as well as fine structure in deep matt.
Key Features & Specifications
| Feature | Specification / Benefit |
|---|---|
| Reflective Cooling Effect | Reflects >90% of solar infrared radiation (800–2500 nm), reducing heat absorption. |
| Temperature Regulation | Maintains internal workpiece temperature≤5°C above ambientunder direct sunlight. |
| UV/Weather Resistance | Withstands1500H xenon lamp aging (ISO 4892-2)and500H salt spray (ISO 9227)for long-term outdoor durability. |
| Environmental Adaptability | Ideal for high-UV, high-heat, and high-humidity environments (e.g., deserts, coastal regions). |
Applications
Outdoor Enclosures (Telecom, Power): Protects internal components from overheating in extreme climates.
Solar Equipment: Enhances efficiency by reducing thermal stress on panels/inverters.
Architectural Structures: Shields buildings/rooftops from solar heat gain, lowering cooling costs.
Advantages
Improvement of infrared reflection of over 20% depending on the color.
Reduction in surface temperature by up to 20%
Reduction of mechanical stress of metals in outdoor area
Reduction of energy costs for cooling the building
Easy handling
Environmentally friendly
Available in a large selection of RAL colors
Why Choose This Series?
Performance Reliability: Maintains consistent cooling performance even after5+ years of outdoor exposure.
Compliance: MeetsASTM G154 (UV exposure)andMIL-STD-810G (thermal shock)standards.
Eco-Friendly: Reduces reliance on active cooling systems, lowering carbon footprint.
Send product request
Other supplier products
 |
Pure Polyester Powder Coating | Main Features: This powder coating is made from carboxyl polyester resin. It is known for its excellent weather resistance and physical mechanical... |
 |
High-End Industrial Powder Coatings | 1. Key Industries & Requirements High-end sectors demand certified performance, durability, and compliance: Aerospace/Defense: Corrosion, UV,... |
 |
Polyester based powder coating MT-OA010G White | Product Description MT-OA010G is a polyester based powder coating, formulated without TGIC. Powder Properties Chemical type Polyester TGI... |
 |
Epoxy zinc-rich powder | Introduction Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder according t... |
 |
EP hybrid powder coating | Product description It is made of epoxy resin and polyester resin as the main raw materials, and has their own unique properties, so that the prod... |
Same products
 |
Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier | Seller: Trucont LLC | At Trucont LLC, we have ongoing Catalytic converter scrap available for immediate loading and shi... |
 |
Epimedium Extract | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
 |
Pomegranate Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance... |
