High Reflectivity (Infrared Camouflage Cooling) Powder Series/metal powder coating factory
Introduction
Powder coatings that reflect infrared radiation reduce the surface temperature of building facades by up to 20 percent. This “sun protection” extends the life of the facade and reduces operating costs.
Heavily heated façades increase indoor temperatures and intensify the heat in cities. moutainchem-Reflective powder coatings specifically reflect infrared radiation and reduce surface heating by up to 20 percent. This reduces the radiator effect, protects the building structure and lowers the energy requirement for air conditioning. At the same time, the color and design can be freely selected so that steel and aluminum facades are optimally protected. The certified powder coatings offer durability and enable energy-efficient and environmentally conscious construction.
Surfaces can reduce energy absorption through radiation
Longer periods of heat and stronger solar radiation increase the load on urban building envelopes. A large proportion of solar radiation is in the near-infrared range (NIR: 780 – 1,400 nanometers) and contributes to surface heating. This heating affects material stability, thermal expansion and the cooling requirements of buildings. Suitable surfaces can significantly reduce energy absorption through radiation. Anyone who takes a closer look will be familiar with the effects from everyday life: dark gray sliding doors often run more heavily on their guides in summer, hot summer winds sweep through the streets in cities and dark painted surfaces heat up particularly strongly under a cloudless sky. The reason for this is that surfaces not only absorb visible light, but also infrared radiation, particularly from the near-infrared spectrum, which is crucial for heating.
Thermal relief through smart surface technology
IGP-Reflective technology combines the highly weather-resistant moutainchem-powder coating with optimized infrared properties. Thanks to the increased reflection of infrared radiation, the surface temperature of coated façade surfaces remains noticeably lower. The effect: less material deformation, a longer façade service life and lower operating costs.
The special pigments used by moutainchem Powder Coatings increase the TSR value (Total Solar Reflectance) and reduce surface heating by up to 20 percent. This reduces the so-called radiator effect. Heated façades act less like radiators, emitting heat to their surroundings. Thermal stresses caused by different expansion of connected metals (bimetal effect) are also reduced. This protects the building structure and increases the durability of the façade. At the same time, the indoor climate is improved as less heat is transferred into the interior of the building. This lowers the energy required for cooling and reduces the amount of heat emitted into the urban space. In this way, the coatings make an effective contribution to reducing the urban heat island effect.
The powder coatings have been specially developed for steel and aluminum façades. Their formulation is designed to optimize the reflectivity of the coating system. The series is available in different variants: smooth gradient in satin gloss and matt as well as fine structure in deep matt.
Key Features & Specifications
| Feature | Specification / Benefit |
|---|---|
| Reflective Cooling Effect | Reflects >90% of solar infrared radiation (800–2500 nm), reducing heat absorption. |
| Temperature Regulation | Maintains internal workpiece temperature≤5°C above ambientunder direct sunlight. |
| UV/Weather Resistance | Withstands1500H xenon lamp aging (ISO 4892-2)and500H salt spray (ISO 9227)for long-term outdoor durability. |
| Environmental Adaptability | Ideal for high-UV, high-heat, and high-humidity environments (e.g., deserts, coastal regions). |
Applications
Outdoor Enclosures (Telecom, Power): Protects internal components from overheating in extreme climates.
Solar Equipment: Enhances efficiency by reducing thermal stress on panels/inverters.
Architectural Structures: Shields buildings/rooftops from solar heat gain, lowering cooling costs.
Advantages
Improvement of infrared reflection of over 20% depending on the color.
Reduction in surface temperature by up to 20%
Reduction of mechanical stress of metals in outdoor area
Reduction of energy costs for cooling the building
Easy handling
Environmentally friendly
Available in a large selection of RAL colors
Why Choose This Series?
Performance Reliability: Maintains consistent cooling performance even after5+ years of outdoor exposure.
Compliance: MeetsASTM G154 (UV exposure)andMIL-STD-810G (thermal shock)standards.
Eco-Friendly: Reduces reliance on active cooling systems, lowering carbon footprint.
在线联系供应商
Other supplier products
 |
Epoxy Zinc-Based Powder Coating | Product Features: Unique and three-dimensional decorative appearance, available in vibrant colors or with an antique style. Capable of concealing... |
 |
IT industry powder coating/best powder coating powder | Brief description: Made of TGIC polyester, epoxy polyester mixed type, etc. as base materials Features: Excellent physical and mechanical proper... |
 |
Polyester based powder coatings MT-620 AM | Product Description MT-620 AM is a series of polyester based powder coatings, formulated without the use of TGIC, designed for the exterior enviro... |
 |
Soft Starry Grey powder coating | Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to that of the skin,... |
 |
Matte Powder Coatings | Introduction Our matte powder coatings are ideal for a wide range of applications, including furniture, appliances, automotive parts, metal panels... |
Same products
 |
5.4,4'-Oxydiphenol CAS 1965-09-9 | 卖方: Yufeng International Group Co., Ltd | Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-... |
 |
1,1,2,2-Tetrachloroethane CAS 79-34-5 | 卖方: Yufeng International Group Co., Ltd | Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te... |
 |
3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9 | 卖方: Yufeng International Group Co., Ltd | Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,... |
 |
2.1,1,2-Trichloroethane CAS 79-00-5 | 卖方: Yufeng International Group Co., Ltd | Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-... |
 |
1.1,1,2,2-Tetrachloroethane CAS 79-34-5 | 卖方: Yufeng International Group Co., Ltd | Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te... |
