.

Hyper-durable powder coatings/non stick powder coating

Powder Properties

Appearance Smooth Matt
Gloss level 20 – 30 gloss units (60°)
Particle size Suitable for electrostatic spray
Specific gravity 1.2-1.7 g/cm³ depending on colour
Storage Dry cool conditions below 25°C
Shelf life 6 months
Sales code 8 series
Stoving Schedule 30 – 40 minutes at 190°C

or 20 – 30 minutes at 200°C

or 15 – 25 minutes at 210°C

(object temperature)

Do not cure above 210°C

Mechanical Tests

Dry Adhesion AAMA2605 8.4 Pass – no removal of film
Impact Resistance AAMA2605 8.5 Pass – no tape removal of film from substrate following 3mm deformation
Dry Film Hardness ISO2815 (Buchholz) Pass
Abrasion Resistance AAMA2605-13 8.6 Pass – abrasion coefficient >40

Pre-treatment

For maximum protection it is essential to pre-treat components prior to the application of MT- D3020 Gen II in accordance with the MT-D Approved Applicator Manual. Aluminium components must receive a full multi-stage chromate conversion coating or suitable chrome-free pre treatment to clean and condition the substrate. Detailed advice should be sought from the pre-treatment supplier.

Application – Cleanup

Below are some recommendations for minimising the risk of cross contamination of MT-D3020 Gen II with powders based on other chemistries such as polyester:

If possible, use a dedicated spray to waste booth if not reclaiming.

Ensure thorough cleaning of spray booth, duct work, cyclone (if within system) and all powder application equipment (guns, hoses, pumps, hoppers, etc) before and after applying MT-D3020 powders.

Clean wet rags should be used for a final wipe down on the inside of the booth and feed hopper.

When returning to application of polyester powders after a MT-D3020 run, shoot foam blocks through hoses and flush guns with next powder to remove any traces of fluorocarbon, and spray this powder to waste before reclaiming.

If reclaiming powder after MT-D3020 run, check reclaim powder for contamination before reuse.

Where possible isolate the application of MT-D3020 from other production eg. use at weekends or on night shift when no other production is taking place.


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

General Powder Coatings –powder coating factory OEM service
General Powder Coatings –powder coating factory OEM service Our standard powder coatings are designed for a wide range of applications, including appliances, furniture, automotive parts, metal panels, indust...
Metallic flat matte MT-049/95586
Metallic flat matte MT-049/95586 Introduction No. MT-049/95586 Color White Surface Metallic flat matte System Polyester Scope of application Lig...
Powder coating for New energy
Powder coating for New energy Introduction Insulating powder coatings protect the strong power of new energy vehicles. The new energy vehicle market has developed rapidly in t...
Metallic flat high gloss MT-049/95270
Metallic flat high gloss MT-049/95270 Introduction No. MT-049/95270 Color Metallic color Surface Metallic flat high gloss System Polyester Scope of ap...
Rutile titanium dioxide STD-895
Rutile titanium dioxide STD-895 Rutile titanium dioxide STD-895 is a coatings grade titanium dioxide pigment manufactured by the chloride process. It is recommended for a range of...
All supplier products

Same products

Heat Sealing Sterilization Pouch
Heat Sealing Sterilization Pouch Seller: Hopeway AMD Heat Sealing Sterilization Pouch is designed for secure medical instrument packaging, supporting ...
Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier
Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier Seller: Trucont LLC At Trucont LLC, we have ongoing Catalytic converter scrap available for immediate loading and shi...
Epimedium Extract
Epimedium Extract Seller: Xi'an Yuensun Biological Technology Co., Ltd. Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ...
Pumpkin Powder
Pumpkin Powder Seller: Xi'an Yuensun Biological Technology Co., Ltd. Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ...
Broccoli Powder
Broccoli Powder Seller: Xi'an Yuensun Biological Technology Co., Ltd. Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who...