Electrostatic blue Polyester wrinkle Powder coating
Applications
-
Applied by electrostatic spraying gun that can provide negative tension of 60-80 kV.
-
Curing schedule : 180-200ºC /10-15 minutes depending on the powder chemistry.
-
Optimal film thickness : 80 -110 um.
-
The size of wrinkle pattern obtained depends on the coating thickness.
-
Excessively thin or thick films will not give a satisfactory finish.
Average Coverage
7-10m³/kg, the membrane is 60μm
(calculate by 100% utilization rate of powder coating).
Storage Requirements
Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.
Health and Safety
This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear appropriate dust mask and glasses.
Specifications
| Chemistry Property | Inspection Standards | Test Indicators (High light) | Test Indicators (Glazed/Matte/Low light) |
|---|---|---|---|
| Impact resistance | ISO 6272, GB/T 1732-1993 | 50kg/cm | 40kg/cm |
| Cupping test | ISO 1520, GB/T 9753-1988 | 8mm | 7mm |
| The adhesion (grid method) | ISO 2409, GB/T 9286-1998 | 0 | 0 |
| Bending | ISO 1519, GB/T 6742-1986 | 2mm | 3mm |
| Pencil Hardness | ASTM D3363, GB/T 6739-1996 | 1H-2H | 1H-2H |
| Salt spray test | ISO 7253, GB/T 1771-1991 | >500 hours | >500 hours |
| Damp heat test | ISO 6270, GB/T 1740-1979 | >1000 hours | >1000 hours |
| Heat resistance | 110℃/24 hours (white) | Good gloss retention, ΔE≤0.3-0.4 | Good gloss retention, ΔE≤0.3-0.4 |
| Florida weathering exposure | ISO 2810, South 45°, 12 months | Gloss retention≥50% | Gloss retention≥50% |
| Artificial accelerated aging | 60℃/8 hours + 50℃/4 hours condensing, cycle for 500 hours | Gloss retention≥50%, Color stability: ΔE≤0.35 | Gloss retention≥50%, Color stability: ΔE≤0.35 |
| Annotate | 1. The above experiment uses 0.8mm steel with degreasing and rust removal, and the coating thickness is 50–70 microns.2. The above coating performance may be lower for glossy and slightly lower gloss finishes. |
Send product request
Other supplier products
 |
Black powder coating | Introduction Application AreaSpecific UseCoating Features Home Appliances Refrigerator shells, washing machine panels, microwave ovens... |
 |
Metallic plane MT-629/93660 | Introduction No. MT-629/93660 Color Brown Surface Metallic plane System Resin imported from Austria Packing Spec... |
 |
High durability powder coatings MT-800 | Product Description MT-800 is a series of high durability powder coatings designed for exterior exposure. Tested against the most severe specifica... |
 |
Aerospace & Aviation Powder Coatings | Looking for premium powder coatings for aerospace and aviation components? We are a Chinese factory with over 20 years of export experience, suppl... |
 |
Polyester/TGIC powder coating series | Made of polyester resin and TGIC curing agent as the main raw materials. Features: —Good adhesion, excellent mechanical properties, tough c... |
Same products
 |
High purity Sucralose | Seller: Shanghai Yifu Food Ingredients Co., Ltd | Thermal properties of SucraloseMelting point / Decomposition point: Approximately 125°C (deco... |
 |
High quality Sucralose | Seller: Shanghai Yifu Food Ingredients Co., Ltd | Safety Information for SucraloseDangerous Goods Mark: XiDangerous Goods Classification Code: 36/3... |
 |
Bulk Supply Sucralose | Seller: Shanghai Yifu Food Ingredients Co., Ltd | Sucralose is widely used in processed foods such as beverages, chewing gum, dairy products, dried... |
 |
Sucralose Price | Seller: Shanghai Yifu Food Ingredients Co., Ltd | Sucralose is a calorie-free, highly sweetening agent substance derived from sucrose. It is in the... |
 |
Wholesale Sucralose | Seller: Shanghai Yifu Food Ingredients Co., Ltd | Sucralose is also known as Trisodium Phosphate. It is a powerful food sweetener, with the trade n... |
