Epoxy potting adhesives WOC-5203(A)/WOC-5203 (B)
■ Description
Two-component encapsulating system based on epoxy resin, is room temperature curing as well as middle temperature curing epoxy resin.
Excellent of the surface gloss of the cured epoxy resin, excellent insulation andelectrical properties,good of heat/cold shock resistance and have good tenacity property.
■ Applications
Encapsulation of electrical components of Capacitor, Inductor, Igniter, Transformer, trigger and Filter.
■ General properties
Test Item |
Test Mothed/Conditions |
WOCC-87-II A |
G-23 B |
Appearance |
Visualization |
All color viscous liquid |
Slight yellow transparent liquid |
Density |
25º C g/m³ |
||
Viscosity |
40º C mpa.s |
1000 - 5000 |
5 - 15 |
Viscosity (A+B blended) |
40º C mpa.s |
600 - 1000 |
■ Using process
Item |
Unit/Conditions |
WOCC-87-II A |
G-23 B |
Ratio of blend |
Weight/Weight |
100 |
15 |
Using time available |
25º C hrs |
60-90 min, the user can lengthen or shorten according to the demands |
|
Curing condition |
º C/hrs |
25/36 or 60/3h |
■ Characteristics after curing
Item |
Unit/Conditions |
WOCC-87-II A/G-23 B |
Hardness |
20º C Shore-D |
>68 |
Volume Resistance |
25º C Ω.cm |
>1014 |
Surface Resistance |
25º C Ω.cm |
>1013 |
Insulation Strength |
25º C kv/mm |
≥20 |
Bending Strength |
Kg/cm2 |
≥82 |
Volume Shrinkage |
% |
≤0.5 |
Glass transition temperature |
Tgº C |
≥60 |
Flame Retardancy |
UL 94 |
V0 or V1 |
Heat/cold Shock Resistance |
-20 to 120º C |
Cycle times: more than 6 |
■ Storage, Packaging
The storage validity is 6 months, a little precipitate shall be occurred provided high temperature. Please stir the material before using.
Note: The above data was tested under the conditions of 70% humidity and 25º C Temperature, This is for your reference only.
Send product request
Other supplier products
Epoxy potting sealants WOC-87-II-N(A)/(B) | ■ Description The product has good of high temperature resistance and hardness, it is two- component heating type epoxy adhesive Excellent of h... | |
Epoxy Resin Adhesive for Battery EC-300 | ■ Description Adhesive for Terminal(coloring adhesive):is mainly used for sealing signs of the battery terminal. No primer required, high bond st... | |
Epoxy Resin Adhesive for Battery EC-42 | ■ Description Adhesive for Cover container: is mainly used for the seal bond of cover and container. Excellent bond strength, good acid resistanc... | |
Polyurethane potting sealants WPU-A80A/B | ■ Description Two-component encapsulating system based on polyurethane, formed from polyurethane, curing agents and additives by special productio... | |
Epoxy potting sealants WOC-87-II(A)/113(B) | ■ Description Two-component encapsulating system based on epoxy resin, formed from auxiliaries including epoxy resin, diluent, Aluminum hydroxide,... |
Same products
Epoxy Primer Sealer for Concrete Parts | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Epoxy primer-sealer for concrete parts is a two-component self-drying paint composed of epoxy res... | |
Epoxy Phenolic Finish | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Epoxy phenolic paint is a two-component product, a special paint composed of epoxy resin, phenoli... | |
FUXI ® EPOXY PAINT | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Liquid epoxy paintare the most important category of anti-corrosion coating products. They are... | |
Epoxy MIO Intermediate Paint | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | The epoxy MIO paintis composed of epoxy resin, mica iron oxide-based anti-rust pigments, solvents... | |
Epoxy Intermediate Floor Paint | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | This product is made of specially modified epoxy resin, high-quality solvent, additive, special a... |