Polyurethane potting sealants WPU-A80A/B
■ Description
Two-component encapsulating system based on polyurethane, formed from polyurethane, curing agents and additives by special production processing, it’s a flame retardancy polyurethane pouring sealant.
Excellent of the surface gloss after curing, excellent electrical properties and have flame retardant property, good of shock resistance and good chemical stability.
■ Applications
Encapsulation of electrical components of the electronic appliances for good of insulation, waterproof, flame retardancy
■ General properties
|
Test Item |
Test Mothed/Conditions |
WPU-A80A |
WPU-A80B |
|
|
Appearance |
Visualization |
White liquid |
Brown liquid |
|
|
Viscosity |
25º C mpa.s |
3000 - 7000 |
100 - 300 |
|
|
Density |
25º C g/m³ |
|
||
|
Ratio of blend |
Weight/Weight |
100 |
20 |
|
|
Viscosity(blended) |
25º C mpa.s |
1000 - 2000 |
||
|
Pot life(60g) |
25º C min |
30 - 50 |
||
|
Gelation time(60g) |
25º C min |
60 - 90 |
||
|
Curing condition |
º C/hrs |
24 hrs |
||
|
Storage validity |
Sealed and storage Temp.below 25º C |
6 months |
6 months |
|
■ Characteristics after curing
|
Item |
Unit/Conditions |
WPU-A80A/B |
|
Hardness |
Shore-A |
80±10 |
|
Tensile strength |
Mpa |
≥1.5 |
|
Elongation |
% |
≥50 |
|
Volume resistivity |
Ω.cm |
4x1013 |
|
Permittivity 50HZ |
-- |
|
|
Tangent angle loss 50HZ |
-- |
|
|
Insulation Strength |
kv/mm |
12.5 |
|
Flame Retardancy |
UL 94 |
V0 |
|
Surface Resistance |
Ω.cm |
＞1014 |
|
Use of temperature range |
º C |
-40 to 120 |
|
Environmental protection standard |
|
Rohs+Reach Low halogen |
■ Storage, Packaging
- Sealed and storage Temperature below 25º C after each operation
- Please see the term of validity in each packages
- Packages: A component is 25kg, B component is 10kg.
- The storage validity is 6 months, a little precipitate shall be occurred provided high temperature. Please stir the material before using.
Note: The above data was tested under the conditions of 70% humidity and 25º C Temperature, This is for your reference only.
(Product color can be adjusted)
Send product request
Other supplier products
 |
Epoxy Resin Adhesive for Battery EC-53 | ■ Description Adhesive for Cover container: is mainly used for the seal bond of cover and container. Excellent bond strength, good acid resistanc... |
 |
Epoxy Resin Adhesive for Battery EC-52 | ■ Description Adhesive for Cover container: is mainly used for the seal bond of cover and container. Excellent bond strength, good acid resistanc... |
 |
Epoxy potting sealants WOC-87-II-D(A)/(B) | ■ Description The product is heat conduction type epoxy adhesive, it is two-component epoxy adhesive. Curing under room termperature, low of sh... |
 |
Epoxy potting adhesives WOC-5203(A)/WOC-5203 (B) | ■ Description Two-component encapsulating system based on epoxy resin, is room temperature curing as well as middle temperature curing epoxy resin... |
 |
Epoxy potting sealants WOC-87-II-N(A)/(B) | ■ Description The product has good of high temperature resistance and hardness, it is two- component heating type epoxy adhesive Excellent of h... |
Same products
 |
Low Emission Graphite Packing Set: Industry-Leading Sealing for Critical Applications | Seller: Magpie Valve Packing Gasket Co., Ltd | Our plant’s Low Emission Graphite Packing Set is precision-engineered to deliver unrivaled ... |
 |
PI High Temperature Resistant Adhesive Tape | Seller: Guangdong NB Technology Co,.Ltd | PI High Temperature Resistant Adhesive Tape Product Description This type of product is resista... |
 |
Blue Kingfisher Tile Adhesive is stable and firm and will not fall off easily | Seller: Zhongshan Blue Kingfisher New Environmental Protection Materials Co., Ltd | Core performance Name:Ceramic Tile Cement Main materials: cement, quartz sand, polymer modifier... |
 |
LLDPE Stretch Film manufacturer | Seller: Guangzhou Dewangtai Trading Co., LTD | LLDPE Stretch Film manufacturer LLDPE Stretch Film Dewangtai is a leading company specializing i... |
 |
Wetting Agent OT-75 | Seller: Guangzhou Dewangtai Trading Co., LTD | Wetting Agent OT-75 is an auxiliary wetting agent for waterborne pressure sensitive adhesive... |
