Silicone rubber for cell phone keypad,Softy Silicone Rubber,Transparent Silicone Rubber
PRODUCTION DESCRIPTION:
The product is one kind of transparent, 2-part liquid silicone rubber, catalyzed by platinum, suitable for injection molding processes under high temperature.
KEY FEATURE:
1. Fast curing under high temperature
2. High tensile strength
3. Good rebound property
4. Outstanding resistance to ageing
5. Low shrinkage
6. Low yellowing
7. Excellent thermal and cold stability
APPLICATION:
The series are suitable for making P+R cell keypad etc.
PACKAGING:
It is available in 20kg pails of 200kg drums
TYPICAL PROPERTIES:
Appearance: Transparent
Viscosity(mpa.s): 700000
Shore A hardness: 70~75
Tensile strength(Mpa): 8.0
Tear resistance(KN/m): 20~25
Elongation at break(%): 260~360
Linear shrinkage(%): 0.1
REMARK:
The product should be closed tightly, protected from light and moisture, the shelf life is 12 months.
These figures are for reference only, please contact us for detail.
ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.
What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
For more information, welcome to contact Lilian:
Phone:
E-mail: lilian(at)
/>Company: XINRUN GROUP LIMITED
Factory address:No.2,Zhouliao Road, Langzhou Industrial Zone,Changping, Dongguan, Guangdong, China
Other supplier products
|
|
Silicone Rubber for Cement Casting,Silicone Rubber For Statues Molds,High Tear Strength Silicone Rubber |
DESCRIPTION OF SILICONE RUBBER FOR CEMENT CASTING：It is a kinds of Two-parts silicone, part A is flowable liquid silicon, part B is curing a... |
|
|
Medical Grade Silicone Rubber,Addition Silicone Putty for Dental Molds,Silicone Rubber for Teeth care |
INTRODUCTION:It is a hydrophilic addition silicone rubber impression material, it contains two components, Part A is platinum catalyst, and P... |
|
|
Silicone rubber for cell phone keypad,Softy Silicone Rubber,Transparent Silicone Rubber |
PRODUCTION DESCRIPTION:The product is one kind of transparent, 2-part liquid silicone rubber, catalyzed by platinum, suitable for injection molding... |
|
|
Silicone Rubber for Ceramics mold making,Silicone Rubber for Durable Molds,Curing fast Liquid Silicone Rubber |
FEATURES OF CERAMICS MOLD MAKING SILICONE RUBBER:-Mixing ratio of catalyst 2%-5%-Good flowability-Great self-deaeration-Very good heat resis... |
|
|
Silicone Rubber for Artificial limbs making,Lifecasting Silicone Rubber, |
DESCRIPTION:Lifecasting silicone rubber is a food grade material. It is soft and strong enough to make many kinds of silicone product as ment... |
All supplier products
Same products
|
|
OSi PEMS 57 CAS 70914-12-4 |
Seller: OSi Holding Limited |
Other descriptions:
Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyethylene... |
|
|
LC12 Two-Component Solvent Free Silicone Conformal Coating |
Seller: Nanjing Silfluo New Material Co., Ltd. |
Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati... |
|
|
LA-17 Polyether Modified Short Chain Polysiloxane |
Seller: Nanjing Silfluo New Material Co., Ltd. |
Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has... |
|
|
LA-14 A Modified Trisiloxane and an Silicone Surfactant |
Seller: Nanjing Silfluo New Material Co., Ltd. |
(It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico... |
|
|
LA-11 A Modified Trisiloxane and an Silicone Surfactant |
Seller: Nanjing Silfluo New Material Co., Ltd. |
(It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe... |
