Silicone rubber for cell phone keypad products
PRODUCTION DESCRIPTION:
The product is one kind of transparent, 2-part liquid silicone rubber, catalyzed by platinum, suitable for injection molding processes under high temperature.
KEY FEATURE:
1. Fast curing under high temperature
2. High tensile strength
3. Good rebound property
4. Outstanding resistance to ageing
5. Low shrinkage
6. Low yellowing
7. Excellent thermal and cold stability
APPLICATION:
The series are suitable for making P+R cell keypad etc.
PACKAGING:
It is available in 20kg pails of 200kg drums
TYPICAL PROPERTIES:
Appearance: Transparent
Viscosity(mpa.s): 700000
Shore A hardness: 70~75
Tensile strength(Mpa): 8.0
Tear resistance(KN/m): 20~25
Elongation at break(%): 260~360
Linear shrinkage(%): 0.1
REMARK:
The product should be closed tightly, protected from light and moisture, the shelf life is 12 months.
These figures are for reference only, please contact us for detail.
ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.
What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
For more information, welcome to contact Lilian:
Phone:
E-mail: lilian(at)
/>Company: XINRUN GROUP LIMITED
Factory address:No.2,Zhouliao Road, Langzhou Industrial Zone,Changping, Dongguan, Guangdong, China
Other supplier products
|
|
Silicone rubber for computer keyboard,Colorful Silicone Rubber,Fast Curing Liquid Silicone Rubber |
PRODUCT DESCRIPTION:This series are 2-part liquid silicone rubber suitable for injection molding processes, catalyzed by platinum.KEY FEATUR... |
|
|
Liquid silicone rubber material for kitchenware,High temperature resistance Silicone Rubber,Low Shrinkage Silicone Rubber |
PRODUCT DESCRIPTION:The series is and tear strength, 2-part liquid silicone rubber suitable for injection molding processes.KEY FEATURES:1. H... |
|
|
Pad printing silicone rubber,Silicone Rubber Stampers,Colorful Silicone Rubber,Silicone Rubber With High Quality |
INTRODUCTION OF THE SILICONE RUBBER FOR MAKING PRINTING PAD:Pad printing silicone rubber is kinds of RTV-2 liquid silicone rubber with excel... |
|
|
Silicone Rubber Material For Toys,Manual mold making silicone rubber,High Safety Silicone Rubber |
DESCRIPTION OF MANUAL MOLD DESIGN MAKING LIQUID SILICONE RUBBER RAW MATERIALS:This is a kind of room temperature vulcanized silicone rubber ... |
|
|
Silicone rubber for cell phone keypad products |
PRODUCTION DESCRIPTION:The product is one kind of transparent, 2-part liquid silicone rubber, catalyzed by platinum, suitable for injection molding... |
供应产品
Same products
|
|
OSi PEMS 57 CAS 70914-12-4 |
卖方: OSi Holding Limited |
Other descriptions:
Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyethylene... |
|
|
LC12 Two-Component Solvent Free Silicone Conformal Coating |
卖方: Nanjing Silfluo New Material Co., Ltd. |
Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati... |
|
|
LA-17 Polyether Modified Short Chain Polysiloxane |
卖方: Nanjing Silfluo New Material Co., Ltd. |
Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has... |
|
|
LA-14 A Modified Trisiloxane and an Silicone Surfactant |
卖方: Nanjing Silfluo New Material Co., Ltd. |
(It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico... |
|
|
LA-11 A Modified Trisiloxane and an Silicone Surfactant |
卖方: Nanjing Silfluo New Material Co., Ltd. |
(It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe... |
