New Type Block Silicone Oil chemicals used in Textile Industry M-100A

• 

Product introduction
Waxy silicone emulsion M-100A is emulsified by M100. M-100 is composed of Polymerization of epoxy silicone oil and ammonia ether, adding epoxy polyether to extension chain at last. ( solvent is ethylene glycol monobutyl ether, Content is 40%). It is efficient resistant to High temperature and alkali.
Basic characteriatics
Appearance: colorless transparent liquid
Ionic properties: slight cationic
PH value: 6.0-6.5
Solubility: dissolved in any proportion of water
Application Areas
Especially suitable for chemical fiber
Smoothness: ★★★★★
Softness: ★★★★
Filling power: ★★★
Elasticity: ★★★
Note: Five star is best
Usage
This product is of high efficient , softening agent, used after diluting 4～5 times (1:4～5), without emulsifiers, dissolved in any proportion of water, tiring evenly, and then slowly add the remaining water, the emulsion is a colorless transparent liquid.
After diluting, the product can be used by exhausting and continuous padding
Exhausting : 2—4%（OWf）,30—40°C/15--30min; PH=5—7
Bath ratio：20--40；
Padding : 10—40g/l
Package And Storage
50kgs or 120kgs per plastic drum. Should be stored in a cool ventilated place, to avoid sun exposure, the storage period is two years.

Other supplier products

	Super soft and slippery hydrophilic silicone softening agent used for the continuous processing	Product introduction Waxy silicone emulsion M-200A is emulsified by M200. M-200 is composed of Polymerization of epoxy silicone oil and ammonia eth...
	New Type Block Silicone Softener Used for Synthetic Fiber DBS9905	Basic Characteristics Appearance: slight yellow transparent liquid Ionic nature: slight cationic / non ionic Solubility: can be dissolved in water ...
	Multi-functional finishing agent for fabric finishing 6601B	The multi-functional finishing agent is mixture of polyester, polyether compound and hydrophilic polymer. Applied to polyester fabric finishing, ex...
	anti-pilling agent textile finishing 6604K	Basic Characteristics Appearance: white powder Solid content: 98% Ionic nature: non ionic pH:6.0-8.0 Properties and advantages 1. suitable for poly...
	Antistatic Agent For All Kind Of Frabic 411A	Main Component Special high molecular compound Technical index Appearance: light colored viscous liquid Solid content (%): 9.5-10.5 pH value (1% wa...

Same products

	OSi PEMS 57 CAS 70914-12-4	Seller: OSi Holding Limited	Other descriptions: Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyethylene...
	LC12 Two-Component Solvent Free Silicone Conformal Coating	Seller: Nanjing Silfluo New Material Co., Ltd.	Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati...
	LA-17 Polyether Modified Short Chain Polysiloxane	Seller: Nanjing Silfluo New Material Co., Ltd.	Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has...
	LA-14 A Modified Trisiloxane and an Silicone Surfactant	Seller: Nanjing Silfluo New Material Co., Ltd.	(It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico...
	LA-11 A Modified Trisiloxane and an Silicone Surfactant	Seller: Nanjing Silfluo New Material Co., Ltd.	(It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe...