Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB
Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB
FEATURES OF GOLOHO-4313-AB
Flammability,UL-94V0 certificationExcellent resistance to high and low temperature, weather, ultraviolet light and aging, excellent performance of insulation and thermal conductivityMix ratio 1:1, mixed color is W/G, low viscosity, good flowability, long working time, Rapid integrated curing speed, suitable for encapsulation of extensive module.Superior heat curing feature allows a wide range of area and depth of sealing parts, smooth surface and out from within.rtv grease
- Description
GOLOHO-4313(W)-AB is atwo part silicone adhesiveflame retardant additional thermal conductive encapsulant particularly designed for electrical industrial. It will form rubber elastomer non-corrosive to metal at room or low temperature .
HOW TO USE GOLOHO-4313-AB
- Stirred thoroughly before mixing
- Mixed in 1:1 ratio by weight
- Agitation: mixed thoroughly by low speed agitation
- Foam scrubbing: evacuation for 5 minutes after mixing. Dispose it if a small amount of operation or no critical request of foam.
- Encapsulation: pour into the article immediately after agitation and foam scrubbing thoroughly, it can flow flat naturally
- Curing 1:curing at room temperature for 2.5 hours. The cure rate is rapidly accelerated with heat
- Curing 2: curing by oven. After 30 min standing and foam scrubbing thoroughly and preliminary curing at room temperature, the encapsulant will be cured at 70℃ for 20 minutes
Send product request
Other supplier products
 |
Heat Resistant Silicone Adhesive/Sealant - 3912R | heat resistant silicone glue/Sealant - 3912R FEATURES OF GOLOHO-3912R ·UL certificated product(E254532)·One-part RTV silicone rubber&... |
 |
High Performance Silicone Adhesive/Sealant - 2402W | FEATURES OF HEAT RESISTANT RTV SILICONE GLUE GOLOHO-2402W GOLOHO-2491 is a heat cure silicone adhesivessilicone glue ·Convenient to use: one... |
 |
Conformal Coating | Conformal coating is a thin transparent polymeric coating applied to PCB’s to provide protection from the end-use environment. Common types o... |
 |
RTV-1 Silicone Rubber | RTV-1 silicone is a condensed silicone rubber that is gradually cured from outside to inside by contacting with moisture in the air. It can be also... |
 |
Thermally Conductive Silicone Adhesive - 2752 | Are you looking for RTV silicone thermal conductivity? FEATURES OF GOLOHO-2752 GOLOHO-2741 is a high performance thermally conductive RTV silicone ... |
Same products
 |
LC12 Two-Component Solvent Free Silicone Conformal Coating | Seller: Nanjing Silfluo New Material Co., Ltd. | Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati... |
 |
LA-17 Polyether Modified Short Chain Polysiloxane | Seller: Nanjing Silfluo New Material Co., Ltd. | Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has... |
 |
LA-14 A Modified Trisiloxane and an Silicone Surfactant | Seller: Nanjing Silfluo New Material Co., Ltd. | (It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico... |
 |
LA-11 A Modified Trisiloxane and an Silicone Surfactant | Seller: Nanjing Silfluo New Material Co., Ltd. | (It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe... |
 |
KSS Potassium Diphenylsulfone Sulfonate | Seller: Nanjing Silfluo New Material Co., Ltd. | KSS is a high heat stable PC additive. Equivalents to FR2025, EF-42. Description of KSS Potass... |
